Accton ISA card in WindowsXP
Results 1 to 6 of 6

Thread: Accton ISA card in WindowsXP

  1. #1
    Registered User
    Join Date
    Nov 2004
    Posts
    2

    Accton ISA card in WindowsXP

    Hey

    Im having difficulties installing a very old network card in Windows XP. Im not sure what card it is exactly but it says Accton on it, and on one of the chips its says MPX2 EN5025A. Thats about all I know.

    Its an ISA card, and I guess its 10mbit. It would probably be easier just go and buy a new card but Ive tried for 2 days now so I dont want to give up

    Ive found drivers for some other cards with the same chip but I have to choose IRQ and IO range manually and I dont know what to use. Ive altso assigned IRQ 3 for ISA in the bios..

    So can anyone help me?

  2. #2
    Registered User CeeBee's Avatar
    Join Date
    Nov 2002
    Location
    USA
    Posts
    2,494
    Use $15 and get a new card. XP doesn't support many ancient cards.
    On the other side try to force a RTL8139 driver, might just work...
    Protected by Glock. Don't mess with me!

  3. #3
    Registered User Cyphrr's Avatar
    Join Date
    Feb 2003
    Location
    Yelm, Wa. Yee Haw
    Posts
    150
    Also may try an NE2000 driver like in the old days (need to know the I/O and IRQ). But I would say, buy a new card. Save the headache and bashing of the computer with a baseball bat.
    Get me a soldering iron and some duct tape, and I'll see what I can do.

  4. #4
    Registered User kpataska's Avatar
    Join Date
    Dec 2002
    Location
    Kenosha, WI
    Posts
    98

    If it's a NE2000 clone...

    Quote Originally Posted by Frupp
    Hey

    Im having difficulties installing a very old network card in Windows XP. Im not sure what card it is exactly but it says Accton on it, and on one of the chips its says MPX2 EN5025A. Thats about all I know.

    Its an ISA card, and I guess its 10mbit. It would probably be easier just go and buy a new card but Ive tried for 2 days now so I dont want to give up

    Ive found drivers for some other cards with the same chip but I have to choose IRQ and IO range manually and I dont know what to use. Ive altso assigned IRQ 3 for ISA in the bios..

    So can anyone help me?
    You can get the drivers from Microsoft for an ISA NE2000 card. You do indeed need to know the IRQ and MEM address. If it's a newer one, you might be able to set it for Plug & Pray...

    However, I'd wait for a sale on a FREE card (w/rebate) and at least have a 10/100 PCI card, but - that's just me.

    Kenny P.
    Visualize Whirled P.'s

  5. #5
    Registered User
    Join Date
    Nov 2004
    Posts
    2
    I went and bought a new card today so I give up on the isa.. you get one for $10 here so that wasnt the problem, I just didnt want to give up when I started

    But it looks like the isa card won

    Thanks for your help btw

  6. #6
    Registered User bftchevy's Avatar
    Join Date
    Dec 2003
    Location
    Merced, CA
    Posts
    14
    Sometimes you need to know when it is worth it to put up a fight.

    When it comes to old NICs that is almost never.

    You made the right choice by replacing it!

Similar Threads

  1. [RESOLVED] DATABOOK, PCMCIA , ISA CARD ADAPTER
    By richhalleland in forum Input Device Drivers
    Replies: 2
    Last Post: February 13th, 2006, 11:17 AM
  2. driver sound card for windowsxp
    By pravich in forum Sound Card Drivers
    Replies: 4
    Last Post: December 30th, 2003, 02:18 AM
  3. scanner card ISA need PCI ONE
    By mordrad in forum Tech-To-Tech
    Replies: 2
    Last Post: September 2nd, 2001, 10:34 AM
  4. [RESOLVED] ISA card converters to PCI slots?
    By mix in forum BIOS/Motherboard Drivers
    Replies: 1
    Last Post: December 1st, 2000, 12:48 PM
  5. [RESOLVED] RE: isa sound card ide interface
    By kababoom in forum Hard Drive/IDE/SCSI Drivers
    Replies: 1
    Last Post: September 7th, 2000, 01:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •