-
December 17th, 2004, 08:28 PM
#1
No sound after reformat......help
I reformatted my Pc and i havent been able to get my sounds card to work.
I have downloaded 4 different drivers, 2 from the maufacturers site.
I have uninstalled and reinstalled the device, reinstalled driver and so on and so on ......
Error message says it cannot install hardwear because it cannot find proper softwear.
I am beyond frustrated as to why i cant get a driver that will work
Here is my sys info...
Operating System Microsoft Windows XP Home Edition
OS Service Pack Service Pack 2
Internet Explorer 6.0.2900.2180 (IE 6.0 SP2)
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard
CPU Type Intel Celeron 4, 1717 MHz (17 x 101)
Motherboard Name Gigabyte GA-8SMMLP (3 PCI, 1 AGP, 2 SDR DIMM, Audio, Video, LAN)
Motherboard Chipset SiS 651
System Memory 288 MB (SDRAM)
BIOS Type Award Modular (11/11/02)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port ECP Printer Port (LPT1)
Display
Video Adapter SiS 650_651_M650_M652_740 (32 MB)
3D Accelerator SiS 315 Integrated
Monitor AcerView 76ie [17" CRT] (64270789)
Multimedia
Audio Adapter SiS 7012 Audio Device
Storage
IDE Controller SiS PCI IDE Controller
Floppy Drive Floppy disk drive
Disk Drive WDC WD200EB-00CPF0 (18 GB, IDE)
Optical Drive ATAPI CD-RW 48X16 (48x/16x CD-RW)
SMART Hard Disks Status OK
Partitions
C: (NTFS) 19085 MB (13822 MB free)
Input
Keyboard Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse PS/2 Compatible Mouse
Network
Network Adapter Realtek RTL8139 Family PCI Fast Ethernet NIC
Network Adapter Toshiba Cable Modem PCX2500 (69.192.205.148)
Modem Generic SoftK56
Peripherals
USB1 Controller SiS 7001 PCI-USB Open Host Controller
USB1 Controller SiS 7001 PCI-USB Open Host Controller
USB Device Toshiba Cable Modem PCX2500
Thank you all
-
December 18th, 2004, 04:46 AM
#2
Registered User
Welcome to the forums justme_
Drivers are all available for that Sound Card here:
http://www.google.com/search?sourcei...2+Audio+Driver
Do you have a branded machine, or is it an assembled one?
Tried a re-format ?
-
December 18th, 2004, 11:06 AM
#3
Registered User
Drivers here: http://www.giga-byte.com/Motherboard..._GA-8SMMLP.htm
Note, it shows sis 7012 and realtek audio. You will need to determine which you have. Download Everest http://www.lavalys.com/products/down...ng=en&pageid=3 and go to Motherboard\Chipset\South Bridge and check the codec name for the ac'97 controller.
Probability factor of one to one...we have normality, I repeat we have normality. Anything you still can't cope with is therefore your own problem.
-
December 18th, 2004, 08:33 PM
#4
Techz-
Ive already downloaded that driver and nothing.....my pc wont recgonize it as the correct driver.
I have a Cicero pc not sure what you mean by assembled (sorry not very good at this stuff)
hudsonsmith- I have everest and i went to Motherboard\Chipset\ but no south bridge just north bridge......
This is what it says in chipset:
North Bridge Properties
North Bridge SiS 651
In-Order Queue Depth 12
Memory Timings
CAS Latency (CL) 3T
RAS To CAS Delay (tRCD) 3T
RAS Precharge (tRP) 3T
RAS Active Time (tRAS) 6T
Row Cycle Time (tRC) 10T
RAS To RAS Delay (tRRD) 2T
Write Recovery Time (tWR) 2T
Memory Slots
DRAM Slot #1 256 MB (SDRAM)
DRAM Slot #2 64 MB (SDRAM)
Integrated Graphics Controller
Graphics Controller Type SiS 315
Graphics Controller Status Enabled
Graphics Frame Buffer Size 32 MB
AGP Controller
AGP Version 2.00
AGP Status Enabled
AGP Device SiS 315 Integrated
AGP Aperture Size 64 MB
Supported AGP Speeds 1x, 2x, 4x
Current AGP Speed 4x
Fast-Write Supported, Disabled
Side Band Addressing Supported, Enabled
Chipset Manufacturer
Company Name Silicon Integrated Systems Corporation
Thank you both for your help.
-
December 18th, 2004, 08:47 PM
#5
Registered User
-
December 18th, 2004, 10:54 PM
#6
Registered User
In Everest, after you select Motherboard\Chipset, look at narrow window across upper right. Select south bridge from there and info in lower pane will change.
Probability factor of one to one...we have normality, I repeat we have normality. Anything you still can't cope with is therefore your own problem.
-
December 18th, 2004, 11:15 PM
#7
I have nothing that says south bridge,
in the top small window it says north bridge and nothing else no choices for south bridge anywhere on the page.
This is all it says
Device Description
North Bridge: SiS 651
Similar Threads
-
By courvier in forum Tech-To-Tech
Replies: 2
Last Post: November 8th, 2010, 06:20 AM
-
By TheHawg in forum Sound Card Drivers
Replies: 6
Last Post: October 8th, 2004, 06:00 AM
-
By hunk_ktm in forum Sound Card Drivers
Replies: 4
Last Post: October 4th, 2004, 09:13 PM
-
By JungleMan1 in forum Tech Lounge & Tales
Replies: 17
Last Post: May 11th, 2004, 11:05 PM
-
By courvier in forum Sound Card Drivers
Replies: 1
Last Post: December 11th, 2000, 05:35 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks