-
March 18th, 2005, 12:26 AM
#1
Print Driver won't install
Hi All,
Have a HP e-Vectra in with Win98. Trying to install USB printer. Install fails at print driver install. Have tried two different USB printers (Epson & HP) and a network attached printer (Brothers), the software for each of these fails at the print driver load. Can anyone give me a boost?
Thank-you in advance
No matter where you go........there you are.
-
March 18th, 2005, 04:27 AM
#2
Geezer
Since this is 98 (or is it actually 98SE ?), which has 'much less good' support for USB than say xp, I'd start by testing your usb ports, as two different printers not installing makes me think of that or the cables you are using (but if you used different cables, then definately the port itself, or more correctly the drivers for it).
Do you have any other types of USB devices 'laid about' so that you can verify whether the software for the USB port is installed correctly ?
-
March 18th, 2005, 12:23 PM
#3
Thought of that.
As posted, thought I would try a network printer, and same problem. Must be something else.
No matter where you go........there you are.
-
March 18th, 2005, 01:31 PM
#4
Geezer
So since you just shot down the only theory I could muster .. any more clues ?
(sorry, I misread it apparently & I assumed both printers were via usb locally)
What about any error messages - you must get something ..?
-
March 18th, 2005, 03:54 PM
#5
Both of the USB printers software would load OK. Printer setup would load and request re-boot upon end of suite install. Upon re-boot, no printers would show in the printer folder, and no programs would see a printer installed.
No matter where you go........there you are.
-
March 19th, 2005, 02:49 AM
#6
Update
Ok,
I have a Brother MFC-5440CN that has both Network and USB conectivity. The Network software install gets all the way to the print driver install and up pops the following error:
Brothers MFL-Pro Suite
An error occured during the installation
Please restart your PC, ensure all active applications are closed - Then reinstall "MFL-Pro Suite"
(ISO35-InstallNetworkPrintDriver-1)
I can get the USB print driver installed, but when I try to print to it I get the following:
Printers Folder
There was an error writing to BRUSB for printer (Brother MFC-5440CN USB Printer)
The system cannot write to the specified device
No matter where you go........there you are.
Similar Threads
-
By ziffel in forum Sound Card Drivers
Replies: 15
Last Post: March 11th, 2009, 01:39 PM
-
By drivers2000 in forum Windows NT/2000
Replies: 1
Last Post: May 30th, 2001, 02:44 PM
-
By pricepd in forum Digital Imaging
Replies: 2
Last Post: April 2nd, 2001, 12:04 AM
-
By j_s_poehl in forum Sound Card Drivers
Replies: 2
Last Post: April 30th, 2000, 09:20 PM
-
By Firesong in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 1
Last Post: May 21st, 1999, 03:34 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks