-
March 31st, 2005, 12:00 PM
#1
Registered User
DVD Burner not Burning after installing more RAM
Sys Spec:
Asus k8V-X (onboard sound, Lan)
Amd 64 3000+ (2.00ghz)
256 pc2100 DRR 333
512 pc3200 DDR 400 (recently added)
450w PSU
Liteon DVD
Pioneer 104 DVD-RW
200 WD HD 7200rpm
Mvidia GeForce Ti 4600
WIN XP PRO w/SP2
DVD burner works as far as reading.
Ok, so I just recently installed the 512 ram and after this, I tried to burn a CD and keep getting failures. Failed with Nero, all versions. Tried Promo and the default windows burning tool (where you just drag and drop to the burner). I got an error from one of the problems stating something like, “Power calibration failure.” I’m thinking since I installed the Ram, somehow it is just enough to take up more power than my PSU is configure for. I read in another forum that some1 was having the same problem and his PSU was set at 300. He changed it to 400 and it was working fine. Anyone know how to do this or is it a different problem I’m having? I will take the RAM off and try burning and see if I still have problems. If it does work, it really would be inconvenient to have to do this every time I have to burn.
Thanks for any advise.
-
March 31st, 2005, 02:33 PM
#2
Registered User
The PSU cannot be set for higher power, it is what is is, if yours is a 450w, its more than enough.
Also your faster RAM, is slowing down to work with your slower RAM, its always better to keep the same brand/speed/size RAM modules.
After googling, it seems that some have suggested different media, and some say its down to the drive giving problems.
excerpt:
A power calibration error means there's some media incompatibility or you have a dirty (or weakening) lasers so that your drive cannot burn a DVD.
What happens is that the burner tests the media you are using by writing a packet to a dedicated zone on the disk. If the test fails the medium is declared bad by the drive and you get a power calibration error.
As a first step try a different brand of DVD blanks.
Your second step might be to see if you can clean the DVD lens. If it's fairly new have it checked under warranty.
-
April 1st, 2005, 03:30 PM
#3
Registered User
OK - just as a shot - open PC back up - disconnect all cables from DVD drive ( power, ide on both ends) then reinsert - Why you ask - I've had similar problems ( not that exact error ) after upgrading some component - AND INADVERTANTLY KNOCKED SOMETHING LOOSE
I remember a 2 day ordeal after a hard drive upgrade - kept getting blue screen of death - had to reseat video card
So take agood look around and reseat your stuff ( including reseating the cables on the dvd)
HTH
All who wander are not lost
What were we talkin bout ?
Similar Threads
-
By jwt in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 0
Last Post: January 6th, 2005, 03:32 PM
-
By m1ek in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 0
Last Post: January 6th, 2005, 01:31 AM
-
By sourced in forum Windows XP
Replies: 1
Last Post: April 13th, 2004, 02:04 AM
-
By airship in forum BIOS/Motherboard Drivers
Replies: 2
Last Post: April 18th, 2002, 06:04 PM
-
By Malkymoo in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 1
Last Post: February 15th, 2001, 11:48 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks