Windows wont show Blank dvd size But nero will

**djruss** · June 6th, 2005, 02:56 PM

Hey Again guys!!!

Windows wont show Blank dvd size But nero will.Nero Will start to Burn now and gets to about 1% and will stop burning and says burn fail at 16x i even tryed 8x.This is the same burner that iv been tryin to get to Read blank DVDs for a week now.Any ide why its doing this??

Thanks again

**djruss** · June 6th, 2005, 03:01 PM

Hey Again guys

Windows wont show Blank dvd size But nero will.Nero will also start to burn the DVD and then at 1% says burn has failed.This is the lite on 16x-+R -+RW DVD+R Double layer burner iv been tryin to get to read blank DVDs for a week now.well at lest iv got it to pick up that it is a blank DVD now.If you guys can help thanks

**Matridom** · June 6th, 2005, 03:02 PM

Originally Posted by djruss

Hey Again guys!!!

Windows wont show Blank dvd size But nero will.Nero Will start to Burn now and gets to about 1% and will stop burning and says burn fail at 16x i even tryed 8x.This is the same burner that iv been tryin to get to Read blank DVDs for a week now.Any ide why its doing this??

Thanks again

your media is rated for what speed?

**TechZ** · June 6th, 2005, 03:20 PM

What brand media is this, it could be a result of poor quality media.

Also check that you have the latest version of Nero http://www.nero.com/en/nero-up.php

**djruss** · June 6th, 2005, 04:07 PM

Hey Guys dont know if this would help you.but here is a log from nero when the burn fails

Dj Russ

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 991MB (1015280kB)
Free physical memory: 639MB (654924kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.6.2005
ISO compilation
4:03:28 PM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:03:28 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

4:03:28 PM #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running

4:03:28 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

4:03:28 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

4:03:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1967775 (437:17.00, 3843MB)

4:03:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

4:03:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

4:03:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:03:28 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1967776 (1967776) = #1967776/437:17.1
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1967776 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

4:03:28 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4030005248, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1967776 | lead-out | 1 | 0x41 | 0x00

4:03:28 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:03:28 PM #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

4:03:28 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:03:28 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

4:03:28 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:03:28 PM #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

4:03:28 PM #18 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes

4:04:21 PM #19 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x068B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

4:04:21 PM #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error

4:04:21 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:04:21 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:04:21 PM #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

4:04:21 PM #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

4:04:21 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.02a, size=19840 bytes, created 8/10/2004 3:39:56 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**Matridom** · June 6th, 2005, 04:53 PM

You've started two threads.. Mod's can you merge them please?

now, looking at your error messages, i noticed this.,.

4:04:21 PM #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error

Looks like you got power supply issues....

**NooNoo** · June 6th, 2005, 05:01 PM

merged.

that error pops up when the unit gets hot, has media it doesn't like or has a firmware issue....

**djruss** · June 6th, 2005, 05:13 PM

Hello Thanks

iv aready got the firmware update yesterday after a week of the Burner not working. Iv had 2 burners installed and both stoped working after upgrading to windows xp media 2005.
From what i get the Lite one that i have can burn both DVD+ and DVD- +RW it wont even read a DVD movie but now sometimes i can stick a DVD- in and it will read as a CD R or will say its a DVD+R and same go's with the DVD +R iv tried all the aspi verson and this one i have now is about as close as iv been able to get it to read DVDs.

Have the new nero. and im tryin to use DVD +R and DVD- both are memorex the DVD+R is 16x and the DVD-are16x

**djruss** · June 6th, 2005, 05:29 PM

PS
Before i installed media 2005 i had put files on both DVD-R and DVD+ the lite on will not read these and if i install the other Burner its called DVDRW1008IM
it will but still wont read Blank DVDs But will Read a DVD movie so i got one that can do some things and another that wont do hardly anything