-
June 10th, 2005, 11:51 PM
#1
Blank cdr's are showing up as full
I have a Microtek computer with an AMD 1.5 ghz Sempron 2200+ processor. and 128 mb ddr mem. It has a 250 gig hd set as master and an 80 as a slave, on the primary IDE cable. ON the other cable I have an I/O Magic cdrw burner 52x32x52set as master and an I/O Magic dvd burner(16x) set as slave. As long as I run either the cdrw or the dvdrw by themselves everything is fine. But with both of them connected, when I place a blank cdr in the cdrw they show up as full. I also use nero6. I've tried switching all harware around but nothing seems to help. I've used the same cdr's forever so I know it's not them. Microtek and I/O Magic tech support can't seem to help.
Any and all suggestions will be greatly appreciated
Thanks
Laura
Similar Threads
-
By dave23ni in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 1
Last Post: May 15th, 2005, 10:07 AM
-
By hypnotoad in forum Networking
Replies: 3
Last Post: March 22nd, 2005, 03:44 PM
-
By ctoro in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 9
Last Post: March 12th, 2005, 04:22 AM
-
By boss12345 in forum Hard Drive/IDE/SCSI Drivers
Replies: 8
Last Post: May 10th, 2004, 08:08 AM
-
By G-Nome in forum CD-ROM/CDR(-W)/DVD Drivers
Replies: 3
Last Post: March 18th, 2002, 11:14 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks