-
September 12th, 2005, 06:15 PM
#1
only 16 color
ok every one help befor now a did it ?
only have 16 color everything not right
Display properties to big for page can not click on the bottom to change it
try every thing i could buy no luck help please thanks
-
September 12th, 2005, 10:06 PM
#2
MegaMod
You might try rebooting into Safe Mode by hitting the Ctrl key on power up. This will load the default drivers with default settings. You can then go in and make your changes.
hth
-
September 13th, 2005, 04:43 AM
#3
Driver Terrier
You may find you need a new driver for your video card... post the details of your machine and we will help you find the right one.
Never, ever approach a computer saying or even thinking "I will just do this quickly."
-
September 13th, 2005, 09:25 AM
#4
MegaMod
Also, check the manual controls on the display itself. Somebody may have moved the display size or moved it too high or too low or off to one side putting part of it off the screen.
-
September 14th, 2005, 09:04 PM
#5
sorry about puting on here two times
i try what you said and it wOrk but now have only 16 color anD 2 color
whAt happen was i install win 98 because it kept stoping . now it is working but the colors with these the colors are mess up.
when windows comes up it looks forpci multmedia audio device drive
and pci ethernet controller drive which it can not find
my computer is a AMD AMD DURON PROCESSER 120 OMB RAM
-
September 15th, 2005, 02:00 AM
#6
Driver Terrier
We need to know exactly what video card you have download this and run it. It will tell you about the hardware in your computer. Please post the motherboard make and model and the video card details.
Never, ever approach a computer saying or even thinking "I will just do this quickly."
-
September 15th, 2005, 08:55 PM
#7
thanks again i down load it and i hope this is what you ask for if not i can put it all here
i am trying the best i can and realy apreaerate the help i sure found out a lot here and it realy helps
Motherboard Name Gigabyte GA-7VEML (3 PCI, 1 CNR, 2 DIMM, Audio, Video, LAN)
Field Value
Motherboard Chipset VIA VT8361 Apollo KLE133
Field Value
Video Adapter Standard PCI Graphics Adapter (VGA)
Field Value
3D Accelerator Trident CyberBlade-i7
Field Value
Monitor Packard Bell 3020
thanks
-
September 16th, 2005, 12:41 AM
#8
Registered User
You can find the VGA Drivers Here , Down load 4.14.10.0005 Win9x, WinMe 5.15 MB, and install, reboot and adjust the vidio propteries.
"More Than Merely Names"
"NEVER FORGOTTEN"
-
September 16th, 2005, 03:34 AM
#9
Driver Terrier
Also the monitor can have a bearing on what the video card will display - does it appear as a plug and play monitor or as the pb3020 in device manager? But worry about this bit after you have installed the drivers Sly linked for you.
Never, ever approach a computer saying or even thinking "I will just do this quickly."
Similar Threads
-
By Wineinabox Mike in forum Video Adapter/Monitor Drivers
Replies: 6
Last Post: October 31st, 2004, 06:47 AM
-
By ShaunB in forum Video Adapter/Monitor Drivers
Replies: 5
Last Post: September 27th, 2001, 09:35 PM
-
By ms.anne in forum Video Adapter/Monitor Drivers
Replies: 1
Last Post: December 29th, 2000, 07:16 PM
-
By cannon1812 in forum Digital Imaging
Replies: 1
Last Post: December 14th, 1999, 06:31 AM
-
By NetSurf916 in forum Video Adapter/Monitor Drivers
Replies: 1
Last Post: December 11th, 1999, 06:59 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks