I can burn Cds, but DVDs is always bugging at the very end: 'Lead out'.
Here is my log, please help !!
I got the latest firmware and drivers for Windows XP, it s a Memorex external double layer 16X DVD burner, and i am using some DVD-R for burning.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 4 TA 0 - 6.6.0.13
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8081N>Version: 0012 - HA 2 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 2
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8081N atapi Port 2 ID 0 DMA: Off
DiskPeripheral : IC25N040ATCS04-0 atapi Port 3 ID 0 DMA: On
6:24:24 PM #4 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
6:24:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1140255 (253:23.30, 2227MB)
6:24:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
6:24:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193
6:24:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:24:25 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1140256 (1140256) = #1140256/253:23.31
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1140256 blocks [Memorex DVD+/-DLRWL1 F16]
--------------------------------------------------------------
6:24:26 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
6:24:27 PM #12 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
6:24:27 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
6:24:27 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
6:24:27 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
6:24:27 PM #16 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
6:24:27 PM #17 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
6:24:27 PM #18 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
6:24:27 PM #19 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:25:36 PM #20 Text 0 File Cdrdrv.cpp, Line 1288
18:25:36.978 - Memorex DVD+/-DLRWL1 F16\H4 T0 : Queue again later
6:40:30 PM #21 Text 0 File WriterStatus.cpp, Line 116
<Memorex DVD+/-DLRWL1 F16> start writing Lead-Out at LBA 1140256 (116620h), lenght 0 blocks
6:40:30 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:40:30 PM #23 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 1140255
I can burn Cds, but DVDs is always bugging at the very end: 'Lead out'.
Here is my log, please help !!
I got the latest firmware and drivers for Windows XP, it s a Memorex external double layer 16X DVD burner, and i am using some DVD-R for burning...
Check supported media : Disabled (0)
6:24:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1140255 (253:23.30, 2227MB)
6:24:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO ..
..Session fixation error
6:42:36 PM #26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1867
Could not perform end of Disc-at-once ..
Hi pat & welcome to windrivers forums , what burning program is that log from ? (please also mention your dvd model number & any other burning software, or any 'virtual drive' type programs being used) I'd say from my initial reading of it, that your dvd doesn't appear to know its meant to be double sided or at least that the disc in might be, so by the sounds of it your writer isn't fully supported by whatever you are trying to burn with .. hence it can't write a 'lead out' as that occurs at the physical end of a dvd, & if it thinks that should be somewhere else, it's gonna get like me, confus-ed !
I also checked my driver, and my DVD does not have any region, i thought that might be the problem and tried to change it, but the PC did not allow me to.
I went in nero 6 settings (right before burning the DVD), and i got rid of 'enable short lead out', 'enable CD overburning' and tried again: same result.
I also tried playing the DVD in my surround system, i got an image that flips all the time (really can t watch it), but sound is ok.
Hope that helps the diagnosis. ...
Nero has updates - have you been to Nero to get the latest?
Originally Posted by patousf
I am communicating through a USB hub,
part number: 3202 3286
Are you saying you have the memorex in a usb caddy? Which is connected to a usb hub rather than directly to the usb ports on the computer? If so, directly connect to the computer usb - do not use a hub.
Nero has a virtual drive - but you may not have installed it.
Never, ever approach a computer saying or even thinking "I will just do this quickly."
ok, i upgraded my software with the latest i could find on www.nero.com, plugged directly to the PC usb, then rebooted.
Same error happened, it looks like the log file is different now, but still having an error at the very end (see below)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 4 TA 0 - 6.6.0.16
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8081N>Version: 0012 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 2
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8081N atapi Port 2 ID 0 DMA: Off
DiskPeripheral : IC25N040ATCS04-0 atapi Port 3 ID 0 DMA: On
12:58:56 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:58:57 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1140255 (253:23.30, 2227MB)
12:58:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
12:58:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193
12:58:57 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:58:57 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1140256 (1140256) = #1140256/253:23.31
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1140256 blocks [Memorex DVD+/-DLRWL1 F16]
--------------------------------------------------------------
12:58:57 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:58:57 PM #12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
12:58:57 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:58:57 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
12:58:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
12:58:57 PM #16 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
12:58:57 PM #17 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
12:58:57 PM #18 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
12:58:57 PM #19 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:59:59 PM #20 Text 0 File Cdrdrv.cpp, Line 1286
12:59:59.466 - Memorex DVD+/-DLRWL1 F16\H4 T0 : Queue again later
1:14:52 PM #21 Text 0 File WriterStatus.cpp, Line 116
<Memorex DVD+/-DLRWL1 F16> start writing Lead-Out at LBA 1140256 (116620h), lenght 0 blocks
1:14:52 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:14:52 PM #23 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1140255
OK, post your motherboard make/model or brand of computer and model and it can be looked up.
I noticed disc at once... are these burns copies on the fly from one dvd to another or are they an image from the hard drive? Or are you copying from and to the same drive?
Never, ever approach a computer saying or even thinking "I will just do this quickly."
I'm still sat looking at this wondering about this bit :-
..Check supported media : Disabled (0) ..
Now I want to know if you can sucessfully write a cd ? Seems to me a much quicker question than all this 'fiddling' with usb - if we can write a cd then there's nothing should be wrong with the connecting bit ?
ok, i uninstalled incd and nero, then reinstalled nero ONLY, still does not work, but it looks like the log error has slightly changed, look at my log below.
The main error looks to be 'session fixation error'.
Otherwise, yes i can write CDs, and i am burning from an image (about 2Gb) , not on the fly.
I could try copying on the fly a DVD, maybe that could help ... i ll try tonight.
Laptop
none
1A23-0009-9130-2142-9435-2075
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 4 TA 0 - 6.6.0.16
Adapter driver: <> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8081N>Version: 0012 - HA 2 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 2
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8081N atapi Port 2 ID 0 DMA: On
DiskPeripheral : IC25N040ATCS04-0 atapi Port 3 ID 0 DMA: On
7:21:29 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
7:21:29 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1140255 (253:23.30, 2227MB)
7:21:29 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
7:21:29 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193
7:21:29 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:21:29 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1140256 (1140256) = #1140256/253:23.31
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1140256 blocks [Memorex DVD+/-DLRWL1 F16]
--------------------------------------------------------------
7:21:30 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:21:30 PM #12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
7:21:30 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:21:30 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 1x (1,385 KB/s)
7:21:30 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:21:30 PM #16 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
7:21:30 PM #17 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
7:21:30 PM #18 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
7:21:30 PM #19 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:22:03 PM #20 Text 0 File Cdrdrv.cpp, Line 1286
19:22:03.084 - Memorex DVD+/-DLRWL1 F16\H4 T0 : Queue again later
7:22:43 PM #21 Text 0 File Cdrdrv.cpp, Line 1286
19:22:43.202 - Memorex DVD+/-DLRWL1 F16\H4 T0 : Queue again later
7:52:26 PM #22 Text 0 File WriterStatus.cpp, Line 116
<Memorex DVD+/-DLRWL1 F16> start writing Lead-Out at LBA 1140256 (116620h), lenght 0 blocks
7:52:26 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:52:26 PM #24 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 1140255
ok, is this a bin cue or an iso? If you burn to the image recorder first, then try...?
What size is the iso or the nrg when the image recorder burn has completed?
Also there is the point Confus-Ed raised about media detection...
Have you got another make of dvd blanks to try?
Are you trying the same image each time or a different one?
Never, ever approach a computer saying or even thinking "I will just do this quickly."
hmmmm ...
i was starting from a .avi file that i converted to an .nrg file (before i removed InCD), i think that image was actually corrupted.
I just created a new image of a different DVD with my new installation of Nero, and was able to burn it successfully.
So now i went back to that old image i had created (the one i ultimately want to burn). It is a collection of 3 .avi of PAL format, that are put together by Nero with a nice menu so that i can switch between the different options on my home theater. it looks that the encoding is the last problem.
Don't bother anymore from here, i guess i ll try to stick to the simpler stuff.
if you guys have any tips/suggestions as to how to do it better, that could help me.
Don't use nero to transcode. There is a nice little thing called avi2dvd all freeware. Having got the vobs, you can then use nero to do the menus and stuff. If that works then Nero has a problem with those particular AVI files.
Never, ever approach a computer saying or even thinking "I will just do this quickly."
Ahhh, that'd explain then why I couldn't figure out what was wrong ! as there wasn't 'really' least not in the burning bit ..
For creating dvd's I actually quite like unleads dvd movie factory (but only since I upgraded my machine, as its slooow at encoding) but very easy to use, but NooNoo's suggestion for freeware to do it, is plenty good enough & if I hadn't got the other free ..
Last edited by NooNoo; October 10th, 2005 at 04:12 AM.
Reply With Quote
Originally Posted by patousf
, what burning program is that log from ? (please also mention your dvd model number & any other burning software, or any 'virtual drive' type programs being used) I'd say from my initial reading of it, that your dvd doesn't appear to know its meant to be double sided or at least that the disc in might be, so by the sounds of it your writer isn't fully supported by whatever you are trying to burn with .. hence it can't write a 'lead out' as that occurs at the physical end of a dvd, & if it thinks that should be somewhere else, it's gonna get like me, confus-ed ! 
more info
- if we can write a cd then there's nothing should be wrong with the connecting bit ?
almost there
as there wasn't 'really' least not in the burning bit ..
Bookmarks