Help with Memorex DVD burner problem
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 25

Thread: Help with Memorex DVD burner problem

  1. #1
    Registered User
    Join Date
    Oct 2005
    Posts
    6

    Help with Memorex DVD burner problem

    I can burn Cds, but DVDs is always bugging at the very end: 'Lead out'.
    Here is my log, please help !!
    I got the latest firmware and drivers for Windows XP, it s a Memorex external double layer 16X DVD burner, and i am using some DVD-R for burning.

    Thanks

    -------------------------------------------------------------------------

    Laptop
    none
    1A20-022N-0010-1725-7050-6989*

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
    ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.13
    Internal Version: 6, 6, 0, 13c
    (Nero Express)
    Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 4 TA 0 - 6.6.0.13
    Adapter driver: <> HA 4
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8081N>Version: 0012 - HA 2 TA 0 - 6.6.0.13
    Adapter driver: <atapi> HA 2

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8081N atapi Port 2 ID 0 DMA: Off
    DiskPeripheral : IC25N040ATCS04-0 atapi Port 3 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8081N D: CDRom0
    Memorex DVD+/-DLRWL1 F16 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 766MB (785392kB)
    Free physical memory: 409MB (418992kB)
    Memory in use : 46 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.10.2005
    Burn DVD Image
    6:24:24 PM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    6:24:24 PM #2 Text 0 File Writer.cpp, Line 122
    Writer Memorex DVD+/-DLRWL1 F16 running

    6:24:24 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x00
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 2335244288
    CUES:
    0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
    3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=253:23.31 ( 1140256) RecDep=0x00
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name: <C:\DOCUME~1\laptop\Desktop\motogp.nrg>

    6:24:24 PM #4 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    6:24:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1140255 (253:23.30, 2227MB)

    6:24:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    6:24:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
    Disc Manufacturer: PRINCO -
    Disc Application Code: 64, Disc Physical Code: 193

    6:24:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:24:25 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1140256 (1140256) = #1140256/253:23.31
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1140256 blocks [Memorex DVD+/-DLRWL1 F16]
    --------------------------------------------------------------

    6:24:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2335244288, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1140256 | lead-out | 1 | 0x41 | 0x00

    6:24:26 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    6:24:27 PM #12 Text 0 File Burncd.cpp, Line 4051
    Cache writing successful.

    6:24:27 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    6:24:27 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    6:24:27 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    6:24:27 PM #16 Text 0 File DVDR.cpp, Line 2267
    Recording mode: Sequential Recording Mode

    6:24:27 PM #17 Text 0 File Mmc.cpp, Line 21469
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    6:24:27 PM #18 Text 0 File DVDR.cpp, Line 2421
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:24:27 PM #19 Text 0 File Cdrdrv.cpp, Line 8438
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    6:25:36 PM #20 Text 0 File Cdrdrv.cpp, Line 1288
    18:25:36.978 - Memorex DVD+/-DLRWL1 F16\H4 T0 : Queue again later

    6:40:30 PM #21 Text 0 File WriterStatus.cpp, Line 116
    <Memorex DVD+/-DLRWL1 F16> start writing Lead-Out at LBA 1140256 (116620h), lenght 0 blocks

    6:40:30 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    6:40:30 PM #23 Text 0 File DVDR.cpp, Line 2658
    EndDAO: Last written address was 1140255

    6:42:36 PM #24 SCSI -1176 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x03F74A00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x02
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x02

    6:42:36 PM #25 CDR -1176 File ThreadedTransferInterface.cpp, Line 1867
    Session fixation error

    6:42:36 PM #26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1867
    Could not perform end of Disc-at-once

    6:42:37 PM #27 Text 0 File DVDR.cpp, Line 2658
    EndDAO: Last written address was -1

    6:42:37 PM #28 CDR -201 File WriterStatus.cpp, Line 167
    Invalid write state
    Memorex DVD+/-DLRWL1 F16\H4 T0

    6:42:37 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    6:42:37 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
    File 'Drivers\Tpp200.sys': Ver=5.04.1150.0 , size=35541 bytes, created 10/5/2001 1:54:28 PM
    File 'Drivers\Tpp300.sys': Ver=5.04.1150.0 , size=33669 bytes, created 10/5/2001 1:54:28 PM
    File 'Drivers\Tpp725.sys': Ver=5.04.1150.0 , size=43269 bytes, created 10/5/2001 1:54:28 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 1:02:55 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  2. #2
    Geezer confus-ed's Avatar
    Join Date
    Jul 1999
    Location
    In front of my PC....
    Posts
    13,087
    Quote Originally Posted by patousf
    I can burn Cds, but DVDs is always bugging at the very end: 'Lead out'.
    Here is my log, please help !!
    I got the latest firmware and drivers for Windows XP, it s a Memorex external double layer 16X DVD burner, and i am using some DVD-R for burning...

    Check supported media : Disabled (0)

    6:24:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1140255 (253:23.30, 2227MB)

    6:24:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO ..

    ..Session fixation error

    6:42:36 PM #26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1867
    Could not perform end of Disc-at-once ..
    Hi pat & welcome to windrivers forums , what burning program is that log from ? (please also mention your dvd model number & any other burning software, or any 'virtual drive' type programs being used) I'd say from my initial reading of it, that your dvd doesn't appear to know its meant to be double sided or at least that the disc in might be, so by the sounds of it your writer isn't fully supported by whatever you are trying to burn with .. hence it can't write a 'lead out' as that occurs at the physical end of a dvd, & if it thinks that should be somewhere else, it's gonna get like me, confus-ed !

  3. #3
    Registered User
    Join Date
    Oct 2005
    Posts
    6

    Unhappy more info

    ok, i am using Nero 6 , no other virtual device (that i know of),
    I am communicating through a USB hub,
    part number: 3202 3286

    I updated firmware and drivers at
    http://www.memorex.com/html/download...D=783&SWID=335

    I also checked my driver, and my DVD does not have any region, i thought that might be the problem and tried to change it, but the PC did not allow me to.

    I went in nero 6 settings (right before burning the DVD), and i got rid of 'enable short lead out', 'enable CD overburning' and tried again: same result.

    I also tried playing the DVD in my surround system, i got an image that flips all the time (really can t watch it), but sound is ok.
    Hope that helps the diagnosis. ...

  4. #4
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    Nero has updates - have you been to Nero to get the latest?
    Quote Originally Posted by patousf
    I am communicating through a USB hub,
    part number: 3202 3286
    Are you saying you have the memorex in a usb caddy? Which is connected to a usb hub rather than directly to the usb ports on the computer? If so, directly connect to the computer usb - do not use a hub.

    Nero has a virtual drive - but you may not have installed it.
    Never, ever approach a computer saying or even thinking "I will just do this quickly."

  5. #5
    Registered User
    Join Date
    Oct 2005
    Posts
    6

    Unhappy still not working

    ok, i upgraded my software with the latest i could find on www.nero.com, plugged directly to the PC usb, then rebooted.
    Same error happened, it looks like the log file is different now, but still having an error at the very end (see below)

    Laptop
    none
    1A20-022N-0010-1725-7050-6989*
    1A23-0809-4030-2420-9529-3201

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
    ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 4 TA 0 - 6.6.0.16
    Adapter driver: <> HA 4
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8081N>Version: 0012 - HA 2 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 2

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8081N atapi Port 2 ID 0 DMA: Off
    DiskPeripheral : IC25N040ATCS04-0 atapi Port 3 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8081N D: CDRom0
    Memorex DVD+/-DLRWL1 F16 E: CDRom4
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 766MB (785392kB)
    Free physical memory: 398MB (408256kB)
    Memory in use : 48 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    8.10.2005
    Burn DVD Image
    12:58:56 PM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    12:58:56 PM #2 Text 0 File Writer.cpp, Line 122
    Writer Memorex DVD+/-DLRWL1 F16 running

    12:58:56 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x00
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 2335244288
    CUES:
    0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
    3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=253:23.31 ( 1140256) RecDep=0x00
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name: <C:\Documents and Settings\laptop\Desktop\DVD burner\motogp.nrg>

    12:58:56 PM #4 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    12:58:57 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1140255 (253:23.30, 2227MB)

    12:58:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO

    12:58:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
    Disc Manufacturer: PRINCO -
    Disc Application Code: 64, Disc Physical Code: 193

    12:58:57 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    12:58:57 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1140256 (1140256) = #1140256/253:23.31
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1140256 blocks [Memorex DVD+/-DLRWL1 F16]
    --------------------------------------------------------------

    12:58:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2335244288, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1140256 | lead-out | 1 | 0x41 | 0x00

    12:58:57 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    12:58:57 PM #12 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    12:58:57 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    12:58:57 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    12:58:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    12:58:57 PM #16 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    12:58:57 PM #17 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    12:58:57 PM #18 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    12:58:57 PM #19 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    12:59:59 PM #20 Text 0 File Cdrdrv.cpp, Line 1286
    12:59:59.466 - Memorex DVD+/-DLRWL1 F16\H4 T0 : Queue again later

    1:14:52 PM #21 Text 0 File WriterStatus.cpp, Line 116
    <Memorex DVD+/-DLRWL1 F16> start writing Lead-Out at LBA 1140256 (116620h), lenght 0 blocks

    1:14:52 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    1:14:52 PM #23 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was 1140255

    1:17:40 PM #24 SCSI -1176 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x03F64A00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x02
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x02

    1:17:40 PM #25 CDR -1176 File ThreadedTransferInterface.cpp, Line 1909
    Session fixation error

    1:17:40 PM #26 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909
    Could not perform end of Disc-at-once

    1:17:40 PM #27 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was -1

    1:17:40 PM #28 CDR -201 File WriterStatus.cpp, Line 167
    Invalid write state
    Memorex DVD+/-DLRWL1 F16\H4 T0

    1:17:40 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    1:17:41 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
    File 'Drivers\Tpp200.sys': Ver=5.04.1150.0 , size=35541 bytes, created 10/5/2001 1:54:28 PM
    File 'Drivers\Tpp300.sys': Ver=5.04.1150.0 , size=33669 bytes, created 10/5/2001 1:54:28 PM
    File 'Drivers\Tpp725.sys': Ver=5.04.1150.0 , size=43269 bytes, created 10/5/2001 1:54:28 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 1:02:55 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

  6. #6
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    is this what you are using? a memorex drive complete with usb 2.0 or firewire? Is your pc running usb 2.0 or 1.1?

    Have you got the latest chipset drivers for the pc? How about windows updates? SP2?
    Never, ever approach a computer saying or even thinking "I will just do this quickly."

  7. #7
    Registered User
    Join Date
    Oct 2005
    Posts
    6

    Unhappy nope ...

    yes, that s what i am using, i am using the usb 2 port, same on my pc.

    windows update: latest, SP2 ...
    chipset drivers: i guess the latest as well, but don t know how to be sure.

  8. #8
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    OK, post your motherboard make/model or brand of computer and model and it can be looked up.

    I noticed disc at once... are these burns copies on the fly from one dvd to another or are they an image from the hard drive? Or are you copying from and to the same drive?
    Never, ever approach a computer saying or even thinking "I will just do this quickly."

  9. #9
    Geezer confus-ed's Avatar
    Join Date
    Jul 1999
    Location
    In front of my PC....
    Posts
    13,087
    I'm still sat looking at this wondering about this bit :-
    ..Check supported media : Disabled (0) ..
    Now I want to know if you can sucessfully write a cd ? Seems to me a much quicker question than all this 'fiddling' with usb - if we can write a cd then there's nothing should be wrong with the connecting bit ?

  10. #10
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 7/25/2005 11:53:28 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 7/25/2005 11:53:04 AM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 7/25/2005 11:53:30 AM (InCD4 driver for win NT/2K/XP)
    INCD .... uninstall incd and nero, reboot then reinstall Nero ONLY... don't install incd and see if that fixes it....
    Never, ever approach a computer saying or even thinking "I will just do this quickly."

  11. #11
    Registered User
    Join Date
    Oct 2005
    Posts
    6

    Unhappy still not working

    ok, i uninstalled incd and nero, then reinstalled nero ONLY, still does not work, but it looks like the log error has slightly changed, look at my log below.
    The main error looks to be 'session fixation error'.

    Otherwise, yes i can write CDs, and i am burning from an image (about 2Gb) , not on the fly.
    I could try copying on the fly a DVD, maybe that could help ... i ll try tonight.

    Laptop
    none
    1A23-0009-9130-2142-9435-2075

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 4 TA 0 - 6.6.0.16
    Adapter driver: <> HA 4
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVD-ROM GDR8081N>Version: 0012 - HA 2 TA 0 - 6.6.0.16
    Adapter driver: <atapi> HA 2

    === Scsi-Device-Map ===
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8081N atapi Port 2 ID 0 DMA: On
    DiskPeripheral : IC25N040ATCS04-0 atapi Port 3 ID 0 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8081N D: CDRom0
    Memorex DVD+/-DLRWL1 F16 E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 766MB (785392kB)
    Free physical memory: 421MB (431560kB)
    Memory in use : 45 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    8.10.2005
    Burn DVD Image
    7:21:29 PM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    7:21:29 PM #2 Text 0 File Writer.cpp, Line 122
    Writer Memorex DVD+/-DLRWL1 F16 running

    7:21:29 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x00
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 2335244288
    CUES:
    0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
    3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=253:23.31 ( 1140256) RecDep=0x00
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name: <C:\Documents and Settings\laptop\Desktop\DVD burner\motogp.nrg>

    7:21:29 PM #4 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    7:21:29 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1140255 (253:23.30, 2227MB)

    7:21:29 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    7:21:29 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
    Disc Manufacturer: PRINCO -
    Disc Application Code: 64, Disc Physical Code: 193

    7:21:29 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:21:29 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1140256 (1140256) = #1140256/253:23.31
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1140256 blocks [Memorex DVD+/-DLRWL1 F16]
    --------------------------------------------------------------

    7:21:29 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2335244288, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1140256 | lead-out | 1 | 0x41 | 0x00

    7:21:30 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    7:21:30 PM #12 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    7:21:30 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    7:21:30 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 1x (1,385 KB/s)

    7:21:30 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:21:30 PM #16 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    7:21:30 PM #17 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    7:21:30 PM #18 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:21:30 PM #19 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    7:22:03 PM #20 Text 0 File Cdrdrv.cpp, Line 1286
    19:22:03.084 - Memorex DVD+/-DLRWL1 F16\H4 T0 : Queue again later

    7:22:43 PM #21 Text 0 File Cdrdrv.cpp, Line 1286
    19:22:43.202 - Memorex DVD+/-DLRWL1 F16\H4 T0 : Queue again later

    7:52:26 PM #22 Text 0 File WriterStatus.cpp, Line 116
    <Memorex DVD+/-DLRWL1 F16> start writing Lead-Out at LBA 1140256 (116620h), lenght 0 blocks

    7:52:26 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    7:52:26 PM #24 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was 1140255

    7:55:09 PM #25 SCSI -1176 File Cdrdrv.cpp, Line 1180
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x03F44E00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x72
    Sense Qual: 0x02
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x72 0x02

    7:55:09 PM #26 CDR -1176 File ThreadedTransferInterface.cpp, Line 1909
    Session fixation error

    7:55:09 PM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909
    Could not perform end of Disc-at-once

    7:55:09 PM #28 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was -1

    7:55:09 PM #29 CDR -201 File WriterStatus.cpp, Line 167
    Invalid write state
    Memorex DVD+/-DLRWL1 F16\H4 T0

    7:55:09 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    7:55:09 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 1x (1,385 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
    File 'Drivers\Tpp200.sys': Ver=5.04.1150.0 , size=35541 bytes, created 10/5/2001 1:54:28 PM
    File 'Drivers\Tpp300.sys': Ver=5.04.1150.0 , size=33669 bytes, created 10/5/2001 1:54:28 PM
    File 'Drivers\Tpp725.sys': Ver=5.04.1150.0 , size=43269 bytes, created 10/5/2001 1:54:28 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 1:02:55 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    Last edited by patousf; October 9th, 2005 at 12:39 PM.

  12. #12
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    ok, is this a bin cue or an iso? If you burn to the image recorder first, then try...?
    What size is the iso or the nrg when the image recorder burn has completed?

    Also there is the point Confus-Ed raised about media detection...

    Have you got another make of dvd blanks to try?
    Are you trying the same image each time or a different one?
    Never, ever approach a computer saying or even thinking "I will just do this quickly."

  13. #13
    Registered User
    Join Date
    Oct 2005
    Posts
    6

    Wink almost there

    hmmmm ...
    i was starting from a .avi file that i converted to an .nrg file (before i removed InCD), i think that image was actually corrupted.

    I just created a new image of a different DVD with my new installation of Nero, and was able to burn it successfully.

    So now i went back to that old image i had created (the one i ultimately want to burn). It is a collection of 3 .avi of PAL format, that are put together by Nero with a nice menu so that i can switch between the different options on my home theater. it looks that the encoding is the last problem.

    Don't bother anymore from here, i guess i ll try to stick to the simpler stuff.
    if you guys have any tips/suggestions as to how to do it better, that could help me.

    Thanks to all !!

  14. #14
    Driver Terrier NooNoo's Avatar
    Join Date
    Dec 2000
    Location
    UK
    Posts
    31,824
    Don't use nero to transcode. There is a nice little thing called avi2dvd all freeware. Having got the vobs, you can then use nero to do the menus and stuff. If that works then Nero has a problem with those particular AVI files.
    Never, ever approach a computer saying or even thinking "I will just do this quickly."

  15. #15
    Geezer confus-ed's Avatar
    Join Date
    Jul 1999
    Location
    In front of my PC....
    Posts
    13,087
    Quote Originally Posted by patousf
    ..image was actually corrupted...
    Ahhh, that'd explain then why I couldn't figure out what was wrong ! as there wasn't 'really' least not in the burning bit ..

    For creating dvd's I actually quite like unleads dvd movie factory (but only since I upgraded my machine, as its slooow at encoding) but very easy to use, but NooNoo's suggestion for freeware to do it, is plenty good enough & if I hadn't got the other free ..
    Last edited by NooNoo; October 10th, 2005 at 04:12 AM.

Similar Threads

  1. DVD Burner will not detect blank cd-r discs
    By SwishaTwins in forum CD-ROM/CDR(-W)/DVD Drivers
    Replies: 3
    Last Post: September 7th, 2005, 03:47 AM
  2. DVD Burner Blues
    By jonnysako in forum CD-ROM/CDR(-W)/DVD Drivers
    Replies: 15
    Last Post: July 29th, 2005, 09:27 AM
  3. Atapi DVD burner problem
    By sedrickf in forum CD-ROM/CDR(-W)/DVD Drivers
    Replies: 15
    Last Post: July 3rd, 2005, 05:06 PM
  4. DVD Burner not Burning after installing more RAM
    By PacMan in forum CD-ROM/CDR(-W)/DVD Drivers
    Replies: 2
    Last Post: April 1st, 2005, 03:30 PM
  5. Problem w/ Dynex CD burner, Win98se, Nero
    By tholmes11 in forum CD-ROM/CDR(-W)/DVD Drivers
    Replies: 7
    Last Post: March 8th, 2005, 12:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •