GE Minicam Pro 98067

[EnderWiggin.1337]

I have this junky webcam (GE Minicam Pro 98067) and it was difficul enough to get it working under XP... but now i'm using x64 edition and I can't seem to find any drivers... does anyone have any suggestions?

Your help is appreciated in advance!

[lacv75]

I have the same camera...the product is manufatured by jasco and there's no driver CD included in the Cam. You have to download the drivers from:

http://www.jascoproducts.com/cgi-loc...html?E+scstore

You'll see several cameras...ours is 98067 (second to last from the bottom).

Good Luck!

[dawgondahill]

I have this junky webcam (GE Minicam Pro 98067) and it was difficul enough to get it working under XP... but now i'm using x64 edition and I can't seem to find any drivers... does anyone have any suggestions?

Your help is appreciated in advance!

can anybody tell me where i can download drivers for this minicam i lost the disc

[Platypus]

Welcome to WinDrivers dawgondahill.

Does the link posted by lacv75 not help you?

[dawgondahill]

i dont know what 2 do with the drivers after i get them what is the process
????????????????????

[Platypus]

Ah, the instructions on the site seem a little strange...

Assuming you have XP, you should be able to double-click on the 98067.ZIP file you downloaded, and use Extract All to unzip the file. For older Windows versions you'll need a utility like WinZip.

If you've done this, you'll slightly confusingly have a folder called 98067 with another folder in it called 98067... Anyway, in there should be an InstallShield installer called GE 98067 MiniCam Pro.exe

Double-click the file to install the drivers. Normally you should not have the camera plugged in while installing drivers, unless the driver installation asks you to plug the device in.

Hope this helps.

[jvaught]

Yeah, I'm having the same problem. I have the same cam, and now that I have Windows XP Pro 64 Bit the drivers that came with it don't work. I went to the link you had and downloaded that file. After installing it, it kept doing the same thing like that downloaded driver wasn't for a 64 Bit system either. What should I do?

[computer]

The location of the Driver downloads has changed to:
http://jascoproducts.com/support/sof...ads.asp#pccams

[sam007]

Hi everybody

I have windows Vista and have the CD for the setup for the cam , after i unstall it , it wont work , it said it can find the driver anybody knows why???

or the cam doesn't work on the Vista ??

plz anybody help.

thx a lot

[CCT]

If you go to the site noted in post #8 above and click on the 'instructions' tab for your model of camera it tells you what OS's are supported.

They also have a Vista reference site BUT no camera data yet:

http://jascoproducts.com/support/vis...d-products.asp

[Adorkable20]

hi i am in need of the SOFTWARE for the Mini Cam Pro and i cannot seem to locate it anywhere can somebody please help me!!!

[NooNoo]

Welcome to Windrivers Adorkable20

It seems you omitted to read post #8 which has a link to the drivers on it

[richardccs73]

no puedo conseguir ese driver de la general electric 98067 gratis?
gracias

[CCT]

Hola. Pruebe este sitio primero. (Hello. Try this site first.)

http://www.jascoproducts.com/support...-downloads.asp


Este sitio es libre, pero debe registrarse. (This site is free but you must register.)

http://members.driverguide.com/drive...riverid=651431

[jokerj]

I downloaded the driver from THE site. I seems to be the same as the disk that came with the camera. My camera is a Rev. 4. The one they show compatible with Vista seems to be a Rev. 1. Mine worked fine with XP It gets a raster on vista but the raster is trash.
Following is from JASCO site (This only applies to cameras marked with Ver. 1 (item #98067) on the bottom of the base of the camera.) If your camera does not have Ver. 1, it is not Vista compatible.
So if your camera does not have Ver. 1 on the base and you are using Vista------forget it.