-
March 5th, 2006, 11:24 AM
#1
jvc gr-d73u camcorder camera DV CAPTURE Problem
HI..I live in TURKEY.I bought a JVC GR-D73U DV camera from Saraybosna in Europe(via original JVC USB DRIVER-IMAGEMIXER) also I have IEEE 1394 PCI CARD with Ulead videostudio 7SE program on my PC WINDOWS XP.I can transfer with USB cable with imagemixer and I can transfer with analog cables(yellow,white,red)on the avermedia tv card.I dont transfer(DON'T CAPTURE) via DV cable. I took them completly to the pc service,they said me problem is DV software Driver,
also I tried other 2 PC.The result is same problem.please help me,maybe I'll need new DV software.Where do I find from.Thanks.
-
March 5th, 2006, 01:14 PM
#2
Hello Isunecli and welcome to Windrivers.
I have gone through some of the forums and found the one below worth try.
Link is: http://www.mcse.ms/archive212-2005-10-1789556.html
Procedure if there is no capture at all:
1. Plug in camcorder to computer VIA firwire/1394. , but turn camcorder
power OFF.
2. Download and install patch "http://support.microsoft.com/kb/885222/" -
don't listen to the instructions - just install patch. and NO RESTART!
3. Go to START>RUN> and type "regedit".
4. scroll to HKEY_LOCAL_MACHINE/SYSTEM/CURRENTCONTROLLSET/ENUM/.
5. Right-Click the PCI folder and select FIND.
6. type in "sidspeed" and and hit ENTER
7. in the right window you should double-click "SidSpeed" - change the value
to 3. Hit OK and exit and then FILE> EXIT.
8. Turn on the camcorder in VCR mode. Start playing the DV tape. Start
restarting your computer. Leave the camcorder running all throughtout the
process. When the computer boots up, click on MY COMPUTER. You should see an
icon with your comcorder on it. Double click on this icon. Do you see video?
If so, EXCELLENT!. if not, continue on.........
ONLY IF NOT WORKING CONTINUE...
Change the REGEDIT, SIDspeed value to 1. Restart with same process of camera
being on and going to MY COMPUTER
--------------------------------------------------------------------------
X-X-X
__________________________________________________ _______________
or try the software linked below. Please fill the form to recieve download link in e-mail.
http://www.captureandconvert.com/download/eval.htm
If it doesnot help try here : http://www.windrivers.com/chat/chat.asp
for all possible help.
Last edited by ross.v; March 5th, 2006 at 01:33 PM.
-
March 5th, 2006, 02:23 PM
#3
Hello my friends..I appreciated your helping my problems.I tried your suggetion but I dont succeed.
I download KB885222 from you sent me internet adresess,I tried to install/run,my PC says me you dont change (there is already a file) you dont make it, and I dont go step 4 what can I do now.please help me.
Thanks again.
-
March 6th, 2006, 11:09 AM
#4
Download and install patch "http://support.microsoft.com/kb/885222/" -
don't listen to the instructions - just install patch. and NO RESTART!
don't listen to the instructions - just install patch. and NO RESTART!
-
March 6th, 2006, 04:15 PM
#5
Registered User
This is a fix that rolls back to the XP SP1 drivers:
http://forums.wugnet.com/modules.php...order-Problem-
It has worked for me in all instances.
Protected by Glock. Don't mess with me!
-
March 6th, 2006, 07:50 PM
#6
I saw your message now, I'll try your suggestion now thanks again your trouble,the time is half past 3 AM,in the morning your time is half past 19 pm now the date is march 06 2006,I am trying your suggestion now.if I have a problem you know, may be I'll send you message again.I thing also I'll need your halping,thanks again.Have a good days.
Last edited by isunecli; March 6th, 2006 at 08:10 PM.
-
March 12th, 2006, 07:29 PM
#7
Hello friends.Thanks you for halping me.you sent me some methods and adresses abaut my problem. I tried all them.I formated (erased) completely my pc and loaded again but I didn't solve this problem.I didn't understand what I do. I'll try some methods again,I think I'll need to help from you.Thanks again have a good days.
.
-
March 15th, 2006, 09:23 AM
#8
A lot of discussion at this url:
http://forum.ecoustics.com/bbs/messa...91/153450.html
You have many options, some you have tried already with the advice of people above.
There are some additional things mentioned at the site I linked - try those also.
"Thought I'd post this seeing as though theres a bit of confusion about JVC video transfers. I Just bought a DV Camera (GR-D70). When you read most JVC user manuals from the website, or hard copy it states that video (stored on tape) can be transferred to a PC using a USB cable. This is incorrect. You need to use a IEEE1394 Firewire cable to transfer the video. USB cable (as thetaxidriver stated) can only transfer data from a memory card. Secondly it states that you can also use a USB cable for webcam streaming. Wrong again, a firewire cable (and card) is required. You also do not need any drivers for firewire connected cameras, because this is the job of the firewire card. Drivers are only needed for some USB connected cameras. OK!
-- Max ([email protected]), March 06, 2005."
gl
Similar Threads
-
By Erik.Madsen in forum Digital Imaging
Replies: 7
Last Post: November 9th, 2004, 03:42 AM
-
By Erik.Madsen in forum Digital Imaging
Replies: 7
Last Post: October 21st, 2004, 02:38 AM
-
By Smallfry in forum Digital Imaging
Replies: 4
Last Post: April 21st, 2004, 06:20 AM
-
By joerusso in forum Digital Imaging
Replies: 1
Last Post: April 3rd, 2004, 06:11 AM
-
By mytrv80 in forum Digital Imaging
Replies: 2
Last Post: March 21st, 2004, 03:56 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks