Help please!!!!
Results 1 to 3 of 3

Thread: Help please!!!!

  1. #1
    Registered User
    Join Date
    Mar 2006
    Posts
    1

    Help please!!!!

    I have a Samsung TS-H552B All of the sudden it will not burn or recognize a blank CD-R I think I see the problem I just dont know how to fix it. In the info tool look at the location it is 0 (0). It is also the master not the slave I dont think that location is right is it? Please help.

    Nero InfoTool 2.21

    Drive Information
    ------------------
    Drive : TSSTcorp CD/DVDW TS-H552B
    Type : DVD±R/RW DL Recorder
    Firmware Version : GA02
    Buffer Size : 2 MB
    Date : ?
    Serial Number : TS-H552BFirmware
    Vendor Specific : 0910
    Drive Letter : E:\
    Location : 0:0
    Mechanism : Tray
    Read Speed : 16.0 , 0.1 X
    Write Speed : 40.0 X

    Read CD Text : Yes
    Return C2 Pointers : Yes
    Read CD-R : Yes
    Read CD-RW : Yes
    Read DVD-ROM : Yes
    Read DVD-RAM : No
    Read DVD-R : Yes
    Read DVD-RW : Yes
    Read DVD+R : Yes
    Read DVD+RW : Yes
    Read DVD+R DL : Yes
    Read Digital Audio : Yes
    Read CD+G : No
    Read VideoCD : Yes

    Write CD-R : Yes
    Write CD-RW : Yes
    Write DVD-R : Yes
    Write DVD-RW : Yes
    Write DVD+R : Yes
    Write DVD+RW : Yes
    Write DVD+R DL : Yes
    Write DVD-RAM : No
    Buffer Underrun Protection : Yes
    Mount Rainier : No
    Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96

    Region Protection Control : RPC II
    Region : 1
    Changes User : 4
    Changes Vendor : 4

    Disc Information (E:\)
    -------------------
    Type : - no disc inserted -


    Drive Information
    ------------------
    Drive : HL-DT-ST CD-ROM GCR-8483B
    Type : CD-ROM Drive
    Firmware Version : 1.00
    Buffer Size : 128 KB
    Date : ?
    Serial Number
    Vendor Specific : týÚ
    Drive Letter : F:\
    Location : 0:1
    Mechanism : Tray
    Read Speed : 48 X
    Write Speed : n/a

    Read CD Text : Yes
    Return C2 Pointers : No
    Read CD-R : Yes
    Read CD-RW : Yes
    Read DVD-ROM : No
    Read DVD-RAM : No
    Read DVD-R : No
    Read DVD-RW : No
    Read DVD+R : No
    Read DVD+RW : No
    Read DVD+R DL : No
    Read Digital Audio : Yes
    Read CD+G : No
    Read VideoCD : Yes

    Write CD-R : No
    Write CD-RW : No
    Write DVD-R : No
    Write DVD-RW : No
    Write DVD+R : No
    Write DVD+RW : No
    Write DVD+R DL : No
    Write DVD-RAM : No
    Buffer Underrun Protection : No
    Mount Rainier : No
    Modes : n/a


    Disc Information (F:\)
    -------------------
    Type : - no disc inserted -


    Interface Information
    ---------------------
    Adapter 1
    ---------
    Description : Primary IDE Channel

    Driver
    Description : system32\DRIVERS\atapi.sys
    Company : Microsoft Corporation
    Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
    Description : IDE/ATAPI Port Driver

    Attached Devices
    Description : Master: TSSTcorp CD/DVDW TS-H552B
    Type : CD-Rom Drive
    DMA : On
    Autorun : On
    Description : Slave: HL-DT-ST CD-ROM GCR-8483B
    Type : CD-Rom Drive
    DMA : Off
    Autorun : On

    Adapter 2
    ---------
    Description : Secondary IDE Channel

    Driver
    Description : system32\DRIVERS\atapi.sys
    Company : Microsoft Corporation
    Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
    Description : IDE/ATAPI Port Driver

    Attached Devices

    Adapter 3
    ---------
    Description : Primary IDE Channel

    Driver
    Description : system32\DRIVERS\atapi.sys
    Company : Microsoft Corporation
    Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
    Description : IDE/ATAPI Port Driver

    Attached Devices
    Description : Master: WDC WD1600JD-22HBB0
    Type : Disk Drive
    DMA : On

  2. #2
    Registered User joker j's Avatar
    Join Date
    Nov 2005
    Location
    Some hick town
    Posts
    44
    I have a Samsung TS-H552B All of the sudden it will not burn or recognize a blank CD-R I think I see the problem I just dont know how to fix it. In the info tool look at the location it is 0 (0). It is also the master not the slave I dont think that location is right is it?
    Your master is your DVD Burner and your slave is the CD-ROM. That does not make a difference. The locations seem right with your DVD Burner being 0 and your CD-ROM being 1. I can at least tell you that.
    I am guessing it is a few years old?
    Last edited by joker j; March 15th, 2006 at 10:39 AM.

    I can't believe I am 86.

  3. #3
    Geezer confus-ed's Avatar
    Join Date
    Jul 1999
    Location
    In front of my PC....
    Posts
    13,087
    What's on D ? & do you have any idea how come you apparently have 3 'IDE adapters' ? - normally you'd only have two entries here, one for the primary channel IDE{wire} & another for the secondary channel IDE {wire} - a third means either we have some add in cards you haven't told us about, or that something isn't working as it should be ...

    Can you boot from a cd ? (see the sticky at the top of this forum, 'cd boot test') & can you read cd/dvd's from inside windoze ? (as its none so clear from what you put) - can I also have some details about what motherboard this might be on ? Chipset details can be most helpful

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •