VGA Drivers for P4m800-m7

**nayan** · June 11th, 2007, 05:56 AM

I tried the driver sugested.

after that the system went in to such a state where it was unable to show anything on screen.

I was able to see the windows xp initial screen and then hard disk check and then display was hanging. though computer used to boot up but display was in hang state,

finally i formatted the c drive and loaded windows xp again. and now i am again on generic xp drivers.

is this correct behaviour, ? did i miss out any thing?

regds
nayan

**NooNoo** · June 11th, 2007, 10:13 AM

No it's not correct behaviour... it would seem that the onboard video is quietly dying...you might want to consider gettng an agp or pci video card and installing that instead.

If you haven't done any updates then install the chipset drivers anyway.

**nayan** · June 11th, 2007, 01:25 PM

today I tried the driver suggested by you.

this time computer did not reported problem like last night. but there is still yellow question mark opposite video controller ( VGA compatible).

if I remove the win xp driver and then restart the PC..it again takes the same driver.

the problem is still there after loading files of 4 in 1

nayan

**azreik** · June 12th, 2007, 11:00 AM

dowload vga driver P4m800-m7

**nctruong** · December 27th, 2007, 09:43 AM

Originally Posted by amolfadnis

When I install these drivers I get an error

"Setup was unable to complete the installation. Check the progress log in your windows directory for more details. (C:\windows\s3iscfg.log)"

################################################## ####
THE DETAILS OF THE LOG FILE ARE AS MENTIONED
################################################## ####

********** S3 GRAPHICS SETUP LOG - Started 2006/07/28 4:55:45 AM **********

***** Please scroll to the end of *****
***** this document for the results. *****

S3Iset32 v2.00.16-0603, (S3GSetup/IS10 2.00.16-0603)
System: Ƞ Build 2600 (Service Pack 2)
Signature: 15-9956 (ANSI)
Caller cmdline: ''
SupportDir: 'C:\DOCUME~1\AMOLFA~1\LOCALS~1\Temp\S3MA7.tmp\'
Called by custom setup app.
AllowReboot: TRUE
Prompt: TRUE
SilentReboot: TRUE
Prompt: FALSE
RemoveWinINF: FALSE
PreInstFiles: FALSE
No UI Reboot: FALSE
MenuAnimOff: FALSE
MenuShadowOff: FALSE
Find VendorID: 5333
Driver INF at: C:\Documents and Settings\Amol Fadnis\Local Settings\Temp\WZSE0.TMP\uc05i.inf
Find hardware code->0
Custom uninstall info: C:\WINDOWS\UChromeP.uns
Hardware found - Ven:1106 Dev:7205 Ssven:3344 Ssdev:1122 Rev:01 Location: bus 1 dev 0 func 0 (InVga=1)

************** Begin Win2K/XP Driver Install **************
Enum GUID {4d36e968-e325-11ce-bfc1-08002be10318} devs to match '':
Enum done.
Could not find enum device to match hardware.
Enumerating all Enum\PCI registry entries...
Device #0 subkey: "VEN_1106&DEV_0296&SUBSYS_00000000&REV_00"
Device #1 subkey: "VEN_1106&DEV_0571&SUBSYS_05711106&REV_06"
Device #2 subkey: "VEN_1106&DEV_1296&SUBSYS_00000000&REV_00"
Device #3 subkey: "VEN_1106&DEV_2296&SUBSYS_00000000&REV_00"
Device #4 subkey: "VEN_1106&DEV_3038&SUBSYS_30381106&REV_81"
Device #5 subkey: "VEN_1106&DEV_3059&SUBSYS_AA011019&REV_60"
Device #6 subkey: "VEN_1106&DEV_3065&SUBSYS_01021106&REV_78"
Device #7 subkey: "VEN_1106&DEV_3104&SUBSYS_31041106&REV_86"
Device #8 subkey: "VEN_1106&DEV_3149&SUBSYS_31491106&REV_80"
Device #9 subkey: "VEN_1106&DEV_3227&SUBSYS_00000000&REV_00"
Device #10 subkey: "VEN_1106&DEV_3296&SUBSYS_00000000&REV_00"
Device #11 subkey: "VEN_1106&DEV_4296&SUBSYS_00000000&REV_00"
Device #12 subkey: "VEN_1106&DEV_7205&SUBSYS_11223344&REV_01"
Found matching hardware!
Found Inst=PCI\VEN_1106&DEV_7205&SUBSYS_11223344&REV_01\4&354aea31&0&0008.
Found Mfg line: 'VIA.Mfg'.
Ln 0: 'viagfx_3314,PCI\VEN_1106&DEV_3344'

#################################################
!! INF does not describe detected hardware!!
Device or vendor ID (or subsystem) mismatch!!
#################################################

StopTimer OK, but no timer action occurred.
-> Setup was unable to complete the installation.

-> Setup was unable to complete the installation. Check the progress log in your Windows directory for more details. (-5)->C:\WINDOWS\s3iscfg.log
** Installation Failed **
!! Setup was aborted !!
******** End of progress log ********