Need usb 2 driver

[subah]

Hello evry one can any one help my with usb2 driver for OS XP pro ans my mother bord is (Intel D865PERL)

[slgrieb]

Subah, XP Service Pack 2 shouldn't need additional drivers for USB 2 with this board. If you have recently re-installed Windows, installing SP2 should fix this.

[subah]

me xp is sp2 , but its seems to me not support the speed of usb2 ???

[CCT]

Make sure you have USB 2.0 enabled in your BIOS.

[subah]

Make sure you have USB 2.0 enabled in your BIOS.

It is enabled and in full speed , when i change it to Hi speed its seems to me the pc not found my usb flash memory , while in another pcs the same flash work fine with the usb2 ?
the file that take 10 min in usbs , take 30 min in my usb

[subah]

Thanks OMGmissinglink for trying to help me , finally i found the drive and now all ports are work as usb2
Thanks alot , and the problem is solved

[CCT]

It is strange, but many computers have 1.1 ports in the front and 2.0 in the back.

As suggested, try different ports.

Since XP SP2 supports 2.0, you can always try a SFC/ Scannow to check drivers.

[subah]

Thanks CCT for your suggestion

[Archer]

See if this helps Subah
Enabling USB 2.0 Support

To Enable USB 2.0:

Reboot (or power on) system.
Press "F2" during POST (Power-on Self Test) to enter system BIOS setup program.
Select "ADVANCED" menu using arrow (left and right) keys.
Select "USB Configuration" and press <enter>.
Enable "High-speed USB".
Press "F10" to Save & Exit BIOS setup program. ( Hi-Speed USB 2.0 controllers are now enabled and your operating system should detect New Hardware during the next normal boot cycle.
Cancel "New Hardware Found".