-
August 2nd, 2001, 05:12 PM
#1
Need Manual or Jumper Setting
Ok I may be asking alot but does anyone have a Manual or the Jumper settings for a Full Yes SiS5598TX MB?
If you do would you email it to me please.
Thanks
-
August 3rd, 2001, 10:56 AM
#2
On the off chance you didn't have the specs here they are:
Mother Board FYI - SiS 5598 TX/VGA MMX AT/ATX
CPU: INTEL PENTIUM 75/.... /200MHZ MMX & CYRIX 6X86, 6X86L, AMD K5, K6 COMPATIBLE CPU
CHIP SET: SIS5598 (VGA ON CHIP)
CACHE: ON BOARD PBSRAM 256KB (32KX32) OR 512KB(64KX32) UP TO 512KB FOR TOTAL CACHE SIZE
MEMORY: UP TO 384MB
EDO AND FAST PAGE DRAM MODULE SUPPORTED DIMM MODULE X 3 SUPPORT SDRAM
IDE: DUAL PIO AND BUS MASTER IDE, UP TO MODE 4 SUPPORTED. ULTRA DMA/33 SUPPORTED LS-120MB FLOPPY SUPPORTED
I/O: FDC X 2 (360K/720K/1.2M/1.4M/2.88M)
TWO SERIAL PORT FOR UARTS (16C550)
IRDA (HPSIR) AND AMPLITUDE SHIFT KEYED
IR(ASKIR)
IR/COM2 SELECT ONE
ONE PARALLEL PORT FOR SPP/EPP/ECP
JUMPER SETTING BY BIOS SETUP
PS2 MOUSE SUPPORTED
USB BUS X 2
PCI: 32BIT X 4 SLOTS FOR PCI VER 2.1
ISA: 16BIT X 3 SLOTS
BIOS: AWARD BIOS (BOOT BLOCK FLASH ROM)
SUPPORT "PLUG AND PLAY" FUNCTION
SWITCHING POWER ON BOARD
MODERN RING-ON START, SOFTWARE POWER-OFF
Here are the links to where I found this info:
http://www.bytecr.com/teclatina/fulyes.htm
http://www.xs4all.nl/~elhvb/mboards/fullyes/5598.html
I had no luck finding the manual.
Happy hunting
-
August 4th, 2001, 12:10 AM
#3
-
August 4th, 2001, 04:48 AM
#4
What Make and Model is the motherboard. SiS5598TX refers to the chipset used on the board. I know that ASUS made a motherboard with this chipset but not sure if thats what you've got.
Need more info !
-
August 4th, 2001, 08:14 AM
#5
try amptrons websight , and pcchips websight and see if you can match it up , or just email the manufacturer for one
ive gotten a few mobos, manuals and bioses emailed to me , just downright begg like you really need it ,,
-
August 4th, 2001, 10:13 AM
#6
-
August 4th, 2001, 01:09 PM
#7
Registered User
I've used this site in the past so maybe give it a try. There is a link at the bottom of their web page to request further documentation.
http://www.igoshop.com/cfacts/docs/systems/80586/560545.htm
Hope it helps. I hate when a company folds (can you say Number 9)!
I only post using 100% recycled electrons!!!
Stay on the bomb run, boys. I'm going to get them doors open if it hair lips everybody on Bear Creek.
-
August 9th, 2001, 07:07 AM
#8
Senior Member
im still looking through my manuals (got hundreds of them) if i find the one ur looking for i'll sacan and email it to u
All sorts of wonderful things in life.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks