-
February 7th, 2001, 10:32 AM
#1
USB port for win95b
im running a win95b and it seems that the usb port is disabled. i need to enabled it so i cna my webcam to work. got any answer?
-
February 7th, 2001, 10:58 AM
#2
Gotta go home so I'll make it short...
Have you installed the USB update? if not you want to run the oemusb.exe cos the others that are on the 95b cd just run defrag and it's really frustrating...
Have you checked in the bios?? Is it disabled in there?
Sorry I've not time to give more detail.
------------------
And Control Enter STILL wont let me post a reply.
And Control Enter STILL wont let me post a reply.
-
February 7th, 2001, 06:20 PM
#3
Heres the link to the OEM USB site... http://www.windrivers.com/scripts/dr...oad/oemusb.exe run it from within Windows ,reboot , be sure USB is turned on in Bios settings and Windows should find it on boot-up.
-
February 8th, 2001, 08:08 AM
#4
I believe the only way to get USB to work in Win95b is to use the file USBSUPP.exe. Please refer to this thread where our resident supreme tech god speaks....
------------------
sHIFT hAPPENS11
-
February 8th, 2001, 10:44 AM
#5
can u check the link again, because when i tried to download it, it seems to be not working. thanks
-
February 8th, 2001, 11:15 AM
#6
The link works OK. Bottom line is, install the USBSUPP.EXE file off the Win95 OEM SR2.x CD. I can't remember which path it's in, try doing a seach of the whole CD...
------------------
sHIFT hAPPENS
-
February 8th, 2001, 11:46 AM
#7
I remembered the opposite... I had to run OEMUSB.EXE to make the muthas work the other updates usually failed on me and wreck vmm32.vxd
When you install oemusb.exe it installs uhcd.sys to your windows system folder. Go into device manager usb properties and point there to update the driver. I've done it a few times, it always worked for me.
------------------
And Control Enter STILL wont let me post a reply.
And Control Enter STILL wont let me post a reply.
-
February 8th, 2001, 02:02 PM
#8
sorry, i mean the link to OEMUSB.EXE . it doesnt work
-
February 8th, 2001, 07:51 PM
#9
Just tried the link , it works fine ?? I've always used this to install USB , never was able to make the USB file on the CD work , not disputing Darren , if he says it does , it does , I just can't seem to figure it out and didn't waste much time trying.
-
February 9th, 2001, 10:16 AM
#10
do you know where i can get the microsoft USB supplement version 4.03.1214?
-
February 9th, 2001, 10:34 AM
#11
http://www.windrivers.com/company/in...oad/oemusb.exe
This link works??
------------------
And Control Enter STILL wont let me post a reply.
And Control Enter STILL wont let me post a reply.
-
February 9th, 2001, 12:53 PM
#12
thanks, i already got that. now i think i need the microsoft USB supplement version 4.03.1214. but dont know where to get it
-
February 9th, 2001, 03:03 PM
#13
That is the link to 4.03.1214 !! And yes the link does work , I just tried it again ,but maybe its picking up info from my internet cache , go to the Windrivers busmastering page and its the first item in the Intel file. I've never needed anything else to get the USB running ,be sure the USB support is switched on in your CMOS ,load the file from within Windows and reboot , should find the USB and hub without a problem.......thats should , not will !!
[This message has been edited by Rkring1 (edited February 09, 2001).]
-
February 14th, 2001, 03:22 PM
#14
Be sure to check the system requirements on your camera. It may not work in 95b, only 98+.
Windows 95 USB support is minimal and leaves something to be desired of.
I think they really dropped the ball on that one...
------------------
"then it comes to be that the soothing light at the end of your tunnel, is just a freight train coming your way..."
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks