-
October 8th, 2004, 12:31 AM
#1
HP PSC 1210 scanning problem
I notice a problem with w98se and this scanner
with w2k the scanner works great
but under 98se it gave a problem , a software conflict
what can i do?
i uninstalled and reinstalled again!!!
-
October 8th, 2004, 02:43 AM
#2
the software error is
there is a comunicate error with the scanner,be sure that the scanner is right pluged and retry
-
October 8th, 2004, 08:05 AM
#3
Registered User
Welcome to windrivers mantra. More info is needed:
-Make and model of computer
-Any yellow ! or ? in device manager?
Probability factor of one to one...we have normality, I repeat we have normality. Anything you still can't cope with is therefore your own problem.
-
October 8th, 2004, 09:20 AM
#4
Originally Posted by hudsonsmith
Welcome to windrivers mantra. More info is needed:
-Make and model of computer
-Any yellow ! or ? in device manager?
Hi hudsonsmith
make and model of computer : I don't know , it's P3 300mb of ram,600mhz
and a sis 7001 usb
-
October 8th, 2004, 09:26 AM
#5
Registry Data
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Run:
Spamihilator = "C:\Programmi\Spamihilator\spamihilator.exe"
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\Run:
ScanRegistry = C:\WINDOWS\scanregw.exe /autorun
SystemTray = SysTray.Exe
CountrySelection = pctptt.exe
PTSNOOP = ptsnoop.exe
LoadPowerProfile = Rundll32.exe powrprof.dll,LoadCurrentPwrScheme
StillImageMonitor = C:\WINDOWS\SYSTEM\STIMON.EXE
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\Run\OptionalComponents:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\Run\OptionalComponents\MSFS:
Installed = 1
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\Run\OptionalComponents\MAPI:
NoChange = 1
Installed = 1
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\Run\OptionalComponents\IMAIL:
Installed = 1
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\\RunOnce:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\RunOnceEx:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\RunServices:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\RunServicesOnce:
USB Host Controller
Imaging Device USB\VID_03F0&PID_2F11&REV_0100&MI_00
Capabilities : 00000000
Class : Image
Class GUID : {6bdd1fc6-810f-11d0-bec7-08002be2092f}
Compatible IDs : USB\CLASS_FF&SUBCLASS_CC&PROT_00
Config Flags : 00000000
Device Description : hp psc 1200 series
Driver : Image\0000
Hardware ID : USB\VID_03F0&PID_2F11&REV_0100&MI_00
Mfg : Hewlett-Packard
USB Device PCI\VEN_1039&DEV_7001&SUBSYS_00000000&REV_11
Capabilities : 14000000
Class : USB
Class GUID : {36FC9E60-C465-11CF-8056-444553540000}
Compatible IDs : PCI\VEN_1039&CC_0C0310
Config Flags : 00000000
Device Description : Open Host Controller SiS 7001 da PCI a USB
Driver : USB\0000
Hardware ID : PCI\VEN_1039&DEV_7001&SUBSYS_00000000&REV_11
Mfg : Silicon Integrated Systems
Driver files for this device:
openhci.sys usbd.sys usbhub.sys usbui.dll
USB Device USB\ROOT_HUB
Capabilities : 80000000
Class : USB
Class GUID : {36FC9E60-C465-11CF-8056-444553540000}
Config Flags : 00000000
Device Description : Hub USB Root
Driver : USB\0001
Hardware ID : USB\ROOT_HUB
Mfg : (Controller host USB standard)
USB Device USB\UNKNOWN (ERROR status!)
Capabilities : 14000000
Class : USB
Class GUID : {36FC9E60-C465-11CF-8056-444553540000}
Compatible IDs : USB\UNKNOWN
Config Flags : 01000000
Device Description : Periferica sconosciuta
Driver : USB\0002
Hardware ID : USB\UNKNOWN
Mfg : (Controller host USB standard)
Device problem code: The device is not connected to the system.
Device Status Description(s):
The registry instance key of the device node is created.
The device has started.
The device failed to start.
The PDO for this device was exposed by its parent.
The device was removed.
The PDO for this device was created and is owned by the PnP Manager.
The device is starting.
The device does not require resources.
There were no resources available to start the device.
The resources for this device are assigned by the PnP Manager.
A legacy driver reported its resources to the PnP Manager.
The device has been added to the system.
The Addroutine failed for this device.
The device's controlling driver is a non-PnP driver.
The device is currently stopped for reconfiguration of its resources.
The device has been uninstalled.
The device needs to be enumerated.
The device is not configured.
The device needs to be reinstalled.
The device is disabled.
The device is being restarted.
This system needs to reboot for this device.
The device is currently being accessed.
The device resources are being assigned but not complete.
The device is being enumerated.
The reported detected devices are started.
Originally Posted by mantra
Hi hudsonsmith
make and model of computer : I don't know , it's P3 300mb of ram,600mhz
and a sis 7001 usb
-
October 8th, 2004, 09:28 AM
#6
USB Device USB\VID_03F0&PID_2F11&REV_0100
Capabilities : 94000000
Class : USB
Class GUID : {36FC9E60-C465-11CF-8056-444553540000}
Compatible IDs : USB\DEVCLASS_00&SUBCLASS_00&PROT_00
Config Flags : 00000000
Device Description : Periferica USB composita
Driver : USB\0003
Hardware ID : USB\VID_03F0&PID_2F11&REV_0100
Mfg : (Controller host USB standard)
-
October 8th, 2004, 09:28 AM
#7
Legacy Config Files: system.ini
[boot]
shell=Explorer.exe
system.drv=system.drv
drivers=mmsystem.dll power.drv
user.exe=user.exe
gdi.exe=gdi.exe
sound.drv=mmsound.drv
dibeng.drv=dibeng.dll
comm.drv=comm.drv
mouse.drv=mouse.drv
keyboard.drv=keyboard.drv
oemfonts.fon=vga850.fon
*DisplayFallback=0
fixedfon.fon=vgafix.fon
fonts.fon=vgasys.fon
386Grabber=vgafull.3gr
display.drv=pnpdrvr.drv
SCRNSAVE.EXE=C:\WINDOWS\SYSTEM\CAMPOS~1.SCR
[keyboard]
keyboard.dll=
oemansi.bin=xlat850.bin
subtype=
type=4
[boot.description]
system.drv=PC standard
keyboard.typ=Tastiera standard 101/102 tasti o Microsoft Natural Keyboard
mouse.drv=Mouse standard
aspect=100,96,96
display.drv=SiS 620
[386Enh]
ebios=*ebios
mouse=*vmouse, msmouse.vxd
device=*dynapage
device=*vcd
device=*vpd
device=*int13
woafont=app850.fon
device=*enable
keyboard=*vkd
display=*vdd,*vflatd
EMMExclude=C000-CFFF
DualDisplay=No
DmaBufferSize=064
Paging=on
[NonWindowsApp]
TTInitialSizes=4 5 6 7 8 9 10 11 12 13 14 15 16 18 20 22
[power.drv]
[drivers]
wavemapper=*.drv
MSACM.imaadpcm=*.acm
MSACM.msadpcm=*.acm
wave=mmsystem.dll
midi=mmsystem.dll
[iccvid.drv]
[mciseq.drv]
[mci]
cdaudio=mcicda.drv
sequencer=mciseq.drv
waveaudio=mciwave.drv
avivideo=mciavi.drv
videodisc=mcipionr.drv
vcr=mcivisca.drv
MPEGVideo=mciqtz.drv
[vcache]
MinFileCache=20480
MaxFileCache=20480
[Password Lists]
MANTRA=C:\WINDOWS\MANTRA.PWL
[DISPLAY]
BusThrottle=1
[network]
Bios=29375826
[TTFontDimenCache]
0 4=2 4
0 5=3 5
0 6=4 6
0 7=4 7
0 8=5 8
0 9=5 9
0 10=6 10
0 11=7 11
0 12=7 12
0 13=8 13
0 14=8 14
0 15=9 15
0 16=10 16
0 18=11 18
0 20=12 20
0 22=13 22
[drivers32]
msacm.lhacm=lhacm.acm
VIDC.VDOM=vdowave.drv
MSACM.imaadpcm=imaadp32.acm
MSACM.msadpcm=msadp32.acm
MSACM.msgsm610=msgsm32.acm
msacm.msg711=msg711.acm
MSACM.trspch=tssoft32.acm
vidc.CVID=iccvid.dll
VIDC.IV31=ir32_32.dll
VIDC.IV32=ir32_32.dll
vidc.MSVC=msvidc32.dll
VIDC.MRLE=msrle32.dll
msacm.msg723=msg723.acm
vidc.M263=msh263.drv
vidc.M261=msh261.drv
VIDC.IV50=ir50_32.dll
msacm.iac2=C:\WINDOWS\SYSTEM\IAC25_32.AX
msacm.msaudio1=msaud32.acm
msacm.sl_anet=sl_anet.acm
VIDC.WMV3=wmv9vcm.dll
msacm.l3codec=l3codecp.acm
-
October 8th, 2004, 10:15 AM
#8
Registered User
See here: http://www.usbman.com/Guides/SiS%20U...d%20Tricks.htm
Note the following:
Instructions for cleaning up device manager in safe mode.
Instructions to change the driver to the Standard Open HCL USB Host Controller.
Instructions to install the Microsoft VIA/AMD Patch if you have an SiS 7001 USB/OHCI and a 350MHZ or faster processor. Microsoft confirms success using this patch with SiS 7001 USB Host controllers.
Probability factor of one to one...we have normality, I repeat we have normality. Anything you still can't cope with is therefore your own problem.
-
October 8th, 2004, 04:40 PM
#9
MegaMod
You might need to completely Uninstall the software from the previous attempts. Read up on HP All-in-One Products - Uninstalling the HP All-in-One Software
Once you get that cleaned up, reboot and then start all over again.
HP PSC 1210 All-in-One drivers for Win98 here. It's a pretty large download but you can also order the CD.
Good Luck!
-
October 8th, 2004, 04:43 PM
#10
MegaMod
I was just reading over your Registry again. It looks like the first USB hub is working fine in that the PSC 1200 shows up OK. It's the second USB hub that is hosed up. I would delete that sucker via Device Manager. Make sure that your PSC 1200 is not hooked up to this second port.
Just another suggestion.
-
October 9th, 2004, 01:30 AM
#11
Originally Posted by DonJ
I was just reading over your Registry again. It looks like the first USB hub is working fine in that the PSC 1200 shows up OK. It's the second USB hub that is hosed up. I would delete that sucker via Device Manager. Make sure that your PSC 1200 is not hooked up to this second port.
Just another suggestion.
I did uninstall as well and reinstall but the problem persist!!!
i can' t scan for example pics,the scannning software runs goes in crash and runs again non stop!
but in w2k it works GREAT!!!!!!!!!!!!!!!!!!!!!!!!!!!!
DonJ thanks i used the hp diagnostic ..
-
October 9th, 2004, 06:05 AM
#12
DonJ i delete the key but noghing!!!
BUT is there somebody that runs w98se and this printer or i'm the only one?
-
October 9th, 2004, 07:23 AM
#13
Registered User
Originally Posted by hudsonsmith
See here: http://www.usbman.com/Guides/SiS%20U...d%20Tricks.htm
Note the following:
Instructions for cleaning up device manager in safe mode.
Instructions to change the driver to the Standard Open HCL USB Host Controller.
Instructions to install the Microsoft VIA/AMD Patch if you have an SiS 7001 USB/OHCI and a 350MHZ or faster processor. Microsoft confirms success using this patch with SiS 7001 USB Host controllers.
Did you do all the things listed here?
Probability factor of one to one...we have normality, I repeat we have normality. Anything you still can't cope with is therefore your own problem.
-
October 9th, 2004, 07:30 AM
#14
Originally Posted by hudsonsmith
Did you do all the things listed here?
yes i did!!
i don't know what can i do ? use 2wk?
-
October 17th, 2004, 12:55 AM
#15
Hi mates
can i do a question ?
IS there that use w98se and this printer ?
had the same problem ??
Similar Threads
-
By houseisland in forum Laptops/PDAs/Smartphones
Replies: 2
Last Post: October 29th, 2004, 08:29 PM
-
By Aleperez in forum Digital Imaging
Replies: 7
Last Post: October 17th, 2004, 09:09 AM
-
By jeffbrown in forum Digital Imaging
Replies: 1
Last Post: October 9th, 2003, 03:02 PM
-
By nutz4drumz in forum Tech-To-Tech
Replies: 1
Last Post: August 6th, 2003, 12:13 PM
-
By jbar1 in forum Tech-To-Tech
Replies: 5
Last Post: July 6th, 2001, 10:17 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks