-
May 2nd, 2008, 01:31 PM
#121
Originally Posted by NooNoo
So first thing to do is install the chipset drivers found here
I have installed the chip set drivers
-
May 2nd, 2008, 02:07 PM
#122
Driver Terrier
What device(s) do you want to plug into the serial port?
Never, ever approach a computer saying or even thinking "I will just do this quickly."
-
May 3rd, 2008, 06:51 AM
#123
Originally Posted by NooNoo
What device(s) do you want to plug into the serial port?
I load programs to a fta box witch has its on loader program.I put the new motherboard in 4 months ago. Before I changed the motherboard my program worked fine.
-
May 3rd, 2008, 06:56 AM
#124
Driver Terrier
OK, well code 10 is a lack of resources. What are the comport settings for your loader? You need to change the comport settings in bios to match and then figure out what is preventing the use of the resources that the comport needs.
The other thing it could be is that the comport has simply died.... it's rare, but I had one a few months ago.
Never, ever approach a computer saying or even thinking "I will just do this quickly."
-
May 3rd, 2008, 07:35 AM
#125
I have done that an have been trying to figure out the resources but have not figure out whats causeing it.thank you for the help
-
May 3rd, 2008, 07:50 AM
#126
Driver Terrier
All resources on newer computers share with each other. You should first of all turn off in bios everything - parallel port, usb, sound, modem, network etc and just leave the comports. Remove them from windows and reboot to reinstall. Do they then show up without the code 10?
If so, re-enable one thing at a time. If not, you need to remove any pci cards and additional drives.
If they still are code 10, then they are almost certainly faulty.
Never, ever approach a computer saying or even thinking "I will just do this quickly."
-
May 4th, 2008, 11:14 AM
#127
Thanks for the help. I tryed all that said to do an they did not work. I guess my ports are bad. Thanks
-
May 4th, 2008, 11:32 AM
#128
Driver Terrier
You can get addon pci cards to provide comports...
Never, ever approach a computer saying or even thinking "I will just do this quickly."
-
August 4th, 2008, 03:30 PM
#129
I have a nikon scanner that uses nikon scan 3.1
It only works on my win 98 system since its not compatible with SP2.
-
February 8th, 2015, 08:47 AM
#130
CONTRIBUTE SP2 Problems and fixes
I have Vista Ultimate 64bit on my laptop and Ive never experienced this problem. Which specific cards do these crashes apply to?
-
February 9th, 2015, 08:57 AM
#131
Registered User
Hello Molly: At this point the thread you are participating in is about 7 years old. I don't believe any of the PCI cards made today would apply to your question at this time.
It's not the computers that keep having problems, it's the users!!
Similar Threads
-
By wmicro in forum Tech Tips
Replies: 1
Last Post: June 22nd, 2004, 02:43 AM
-
By cabal in forum Tech-To-Tech
Replies: 9
Last Post: April 21st, 2004, 12:23 PM
-
By Dark Millennium in forum Windows NT/2000
Replies: 7
Last Post: December 28th, 2002, 11:20 PM
-
By unknown- in forum Hard Drive/IDE/SCSI Drivers
Replies: 3
Last Post: March 17th, 2001, 08:33 PM
-
By stephenr in forum Windows 95/98/98SE/ME
Replies: 1
Last Post: October 29th, 1998, 11:28 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks