-
July 24th, 2001, 10:17 PM
#1
Computers & Magnetic Tip Screwdrivers
Back when I was in school for networking we had an A+ class. I remember asking the instructor on the effects of using a magnetic screwdriver when working on a computer. He (with 20+ years experience in the industry) said he uses them and never has had a problem. I personally don’t use them just to minimize the risk, but what are your opinions on this? Anyone ever have any problems?
-
July 25th, 2001, 12:13 AM
#2
Originally posted by sennister:
<STRONG>Anyone ever have any problems?</STRONG>
None.
"Badges? We don't need no stinking badges."
-
July 25th, 2001, 02:12 AM
#3
Registered User
Use Em all the time.
The magnetic field generated by the screwdriver could only hurt one component in your PC anyway: the Hard Drive.
It however is sheilded by a metal case. You could probably hurt it with a speaker magnet... But not much else...
(Though I must admit, I've never tried <IMG SRC="smilies/biggrin.gif" border="0">)
Matt
"If you have been tempted into evil, fly from it. It is not falling into the water, but lying in it, that drowns"
-
July 25th, 2001, 02:26 AM
#4
Personally I've never had a problem using a magnetic screwdriver.
Although you can hold one in front of a monitor screen and get a weird effect.
Good day to be alive, sir
Good day to be alive he says, yeah
-
July 25th, 2001, 05:56 AM
#5
Senior Member
i've never personally had a problem with magnectic screwys, but there was this one time i dropped a screwdriver on my mobo, never worked the same since <IMG SRC="smilies/frown.gif" border="0">
All sorts of wonderful things in life.
-
July 25th, 2001, 06:54 AM
#6
Registered User
No problems at all...I just always power down before going near a computer with a screwdriver.
Rudolph N. Koester
U.S.Army(disabled)
ASE Certified Master Engine Machinist
"Life's journey is not to arrive at the grave safely in a well preserved body,but rather to skid in sideways, totally worn out shouting "...holy ****...what a ride!"
Don't pick a fight with an old man. If he's too old to fight... he'll just kill you. J. Steinbeck
-
July 25th, 2001, 08:03 AM
#7
Never had a problem either....
-
July 25th, 2001, 09:56 AM
#8
Been using them for years without a single problem
How does Mr. T take his coffee??
In a cup foo!
-
July 25th, 2001, 10:05 AM
#9
Most Greaterlyist
It's good to be the King.
-
July 25th, 2001, 11:51 AM
#10
Just don't get into the habit of touching components with it and you won't transfer an static charge to them and be safe too.
Personally, I'd make sure the tip is inches away from any component when using one, even to get a screw. I'd soone turn the computer off and shake the screw out of the case than risk messing up the components with ESD or a magnetic field. Maybe I'm just playing it safe. I used to teach students to work on computers and you would be amazed how something so simple as a magnetic screwdriver can be used to wreak so much havoc in a computer system. Maybe that's why we played with the magnetic tools and left the students to use the safer ones, including the non metal screwdrivers.
God is all knowing, I am just human.
-
July 25th, 2001, 12:10 PM
#11
Registered User
I agree with WesFlash on this.
Don't stab sensitive components like the CPU or onboard chips (sound/video, etc.) and you should be fine.
Never had a problem so far.
Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so. -Douglas Adams
-
July 25th, 2001, 12:12 PM
#12
I use them all the time for 18 years, I just touch the screw only and nothing else <IMG SRC="smilies/smile.gif" border="0">
http://www.amd.com/us-en/assets/cont...uts/athlon.gif
Do you leak any fluids, do you have any bumps on your rear, do you have any unpleasant odors?
If you answered yes to any of these then you are not qualified to own a new AMD ATHLON XP.
If someone ask you if you are running the all-new fastest AMD ATHLON XP, just turn around and reply "WHY YES, AND ITS CERTIFIED"
http://www.daemonprojects.com/
-
July 25th, 2001, 05:02 PM
#13
Registered User
As I have told my son and nephew - "Magnetic Tip Screwdrivers are alright, but if you ever open up the computer case again while eating freaking jelly doughnuts I turn the both of ya into mules!" <IMG SRC="smilies/mad.gif" border="0"> (Actually happened) <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">
I only post using 100% recycled electrons!!!
Stay on the bomb run, boys. I'm going to get them doors open if it hair lips everybody on Bear Creek.
-
July 25th, 2001, 05:54 PM
#14
I use them sometimes too, the magnetic field is barely strong enuf to keep the screw on let alone damage anything, besides with a steady hand you can do it without touching anything delicate anyway <IMG SRC="smilies/smile.gif" border="0">
"Knowledge belongs in the hands of the people"
-
July 25th, 2001, 06:15 PM
#15
I use a mechanical screw starter from snap-on. If you want to check it out, go to snapon.com and search for part no. CSSC9. It has a plastic shank and does phillips and flat tip screws without magnets (for you paranoid types). I have, however, never had a problem with magnetic type screw starters. Most quality screwdrivers are slightly magnetized, anyway. (Snap-On, Craftsman, ect.)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks