[RESOLVED] how to disable a motherboard video card

May 11th, 1999, 07:43 PM

tried to install voodo 3 2000pci
on toshiba 7200 infinti.....the s virge
video card is on motherboard....not able
to disable it......any help for me
thanks.....

May 12th, 1999, 08:31 AM

First of all check the motherboard's manual to see if you can disable the onboard vga by using jumber settings. If so, open the chassis and do it. If not, check the bios to see if there is a choice for you to disable it by using bios settings.
If not, put the card on and power on the computer. Under Windows' Control Panel enter
System and Device Manager. Check how many vga cards are present in your computer.
If two, disable the old one and leave the new one enabled. If not, check for new hardware or conflicts between vga cards.

Good luck

George

May 11th, 1999, 07:43 PM	#1
bgood Guest Posts: n/a	how to disable a motherboard video card tried to install voodo 3 2000pci on toshiba 7200 infinti.....the s virge video card is on motherboard....not able to disable it......any help for me thanks.....

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

May 12th, 1999, 08:31 AM	#2
Geo111 Guest Posts: n/a	First of all check the motherboard's manual to see if you can disable the onboard vga by using jumber settings. If so, open the chassis and do it. If not, check the bios to see if there is a choice for you to disable it by using bios settings. If not, put the card on and power on the computer. Under Windows' Control Panel enter System and Device Manager. Check how many vga cards are present in your computer. If two, disable the old one and leave the new one enabled. If not, check for new hardware or conflicts between vga cards. Good luck George