[RESOLVED] Win95/SB16SCSI

November 14th, 1998, 10:14 PM

My sound blaster 16 card has jumpers to configure high DMA at either 5, 6, or 7 and when testing, I have to use the low DMA channel for 16 bit sound. (Because of motherboard) After upgrading to Windows 95, I have problems running Comptons encylopedia having the voice in the tutorial to play. I try to put channel 1 for my high DMA channel in windows control panel, but, it sees how the jumpers are set and will only allow channels 5, 6, and 7.
Not all .wav files play

November 21st, 1998, 10:55 AM

If you are using the default drivers from windows 95 you need to the SB16 drivers from creative. Before you install the Creative labs drivers uninstall the win 95 default driver.

November 14th, 1998, 10:14 PM	#1
JimboM40 Guest Posts: n/a	Win95/SB16SCSI My sound blaster 16 card has jumpers to configure high DMA at either 5, 6, or 7 and when testing, I have to use the low DMA channel for 16 bit sound. (Because of motherboard) After upgrading to Windows 95, I have problems running Comptons encylopedia having the voice in the tutorial to play. I try to put channel 1 for my high DMA channel in windows control panel, but, it sees how the jumpers are set and will only allow channels 5, 6, and 7. Not all .wav files play

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

November 21st, 1998, 10:55 AM	#2
graphic Guest Posts: n/a	If you are using the default drivers from windows 95 you need to the SB16 drivers from creative. Before you install the Creative labs drivers uninstall the win 95 default driver.