[RESOLVED] Enhanced video problems

[Teke]

On a Win95C machine I cannot get it to run in an enhanced mode for the video. I've tried several video cards, both PCI and AGP, but All I get are horizontal rainbows!!! It works fine if I reboot in safe mode and then reset the card to a Standard VGA. Is there a corrupt VXD file or what?

[AlienDyne]

Check the Refresh Rate. The problem must be caused by this.
If your monitor is an old model, it can't support high refresh rates.
Try setting it to 53-60Hz and see what you have to see.
If you aren't able to do this when loaded Windows normally, try on Safe Mode.

Hope this helps. Good luck.

------------------
"Matter is passive. In spite of its power, it can't be controlled without the human mind." Sokrates

My Hardware Info, Hardware Media and Computer History page