[RESOLVED] Changed Bios
Results 1 to 4 of 4

Thread: [RESOLVED] Changed Bios

  1. January 8th, 2001, 10:37 PM #1
    Jeff Sirkoch
    Guest

    Resolved [RESOLVED] Changed Bios

    I have changed the following in my BIOS and now my computer is stuck on the OEM logo when first powered. I tried a startup disk. Drive A: read it but nothing happens. I enabled the "USB Legacy Support".
    Is there a way to startup my computer?
    Reply With Quote Reply With Quote
  2. January 9th, 2001, 10:34 AM #2
    MadDog
    MadDog is offline
    Registered User MadDog's Avatar
    Join Date
    Aug 2000
    Location
    Sunnyvale, CA USA
    Posts
    407

    Smile

    Jeff,
    The only reason to enable USB legacy support is if you have a USB mouse or keyboard. What you can do is find your motherboard manual, and follow the instructions for clearing the BIOS. You'll then have to go in and put in your own settings.

    HTH

    ------------------
    MadDog
    Reply With Quote Reply With Quote
  3. January 9th, 2001, 08:17 PM #3
    J_Man
    Guest

    Post

    You need to reset your BIOS. Look for a jumper on the motherboard that saya "Clear CMOS" or something similar. Change the jumper over, turn on, turn off, replace jumper to original possition and turn back on. Fixed.
    Reply With Quote Reply With Quote
  4. January 9th, 2001, 08:40 PM #4
    Shinma
    Guest

    Post

    IF unable to locate the clear CMOS jumpers, remove the CMOS battery from the motherboard for a few minutes and re-install.
    Cheers
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules