My cd-rom is all meesed up!!!

[Aeris]

Ok check this out....

I formate my computer and when i put cd in my cd-rom driver he insnt dedecting any cd-rom. so i ask help on Irc. They said to open the cpu case and check if somthing is not O.K
Everything was O.K. So i start my cpu and I go in my Computer then he dissapered no more cd-rom driver. He isnt dedecting my cd-rom. But he is detecting My CD-RW just for copy of cd i use this its so slow so if there any help solution reply fast

[Matt_29]

Originally posted by Aeris:
Ok check this out....

I formate my computer and when i put cd in my cd-rom driver he insnt dedecting any cd-rom. so i ask help on Irc. They said to open the cpu case and check if somthing is not O.K
Everything was O.K. So i start my cpu and I go in my Computer then he dissapered no more cd-rom driver. He isnt dedecting my cd-rom. But he is detecting My CD-RW just for copy of cd i use this its so slow so if there any help solution reply fast

make sure the jumpers are set right ... (back of each drive) .. make sure one is master and one is slave , in case your not sure its a little thing with two pin holes in it) itll have ether slave or master or MS or SL .. (theres also Cable Select or CS)

[Mr_Miyagi]

I think you have several problems:

a) you formatted the hard drive, which is why you cannot see the cdrom

b) your boot disk does not have cdrom drivers, which is why you cannot see the cd


if neither of these, then please ignore.

1) get this, and make a bootable floppy disk with cdrom drivers
http://tweakcentral.com/bootdisk_2.htm

2) boot with it.

3) put (windows) cd into drive and select cd letter... one hard drive partition, cd will be D:

4) type setup {enter}

proceed with windows install.


if any of this is wrong, please come back with MORE information; and your problem in more detail.
4)

[Mayet]

Thanks for all these helpful little links Andy... <IMG SRC="smilies/smile.gif" border="0">

[Mr_Miyagi]

Originally posted by Mayet:
<STRONG>Thanks for all these helpful little links Andy... <IMG SRC="smilies/smile.gif" border="0"></STRONG>

no problem.
it's nice when you are able to eventually solve a problem such as this.... <IMG SRC="smilies/wink.gif" border="0">

[aabatteries]

You can go into your bios settings and make your cd rom the first bootable drive. hit del at the startup screen to enter. Doing it this way allows you to just use your cd rom to install your OS. I imagine that you don't have your OS installed now because you can't!
Make cdrom first bootable and then put OS cd in and reboot! Good luck!

-aa

[Aeris]

Ok thx for al the replie

But for tha bootdisk with no cd-rom drive isnt working.. Because there are just windows 95 and 98 for this...
This is my cpu

Pentium II 400 MHz
96 m d r
Acer cd-rom 50x
Cd for copiing disk
Windows ME

If u have any solution plz again reply this

Thx u <IMG SRC="smilies/wink.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

[3D Prophet III]

Did you just install the cd burner or cd-rom drive right before you formatted the hard drive? If so, go into system setup and set everything to auto for primary/master primary/slave, secondary/master secondary/slave. see what that does for you. Sounds like you're saying WinMe isn't seeing the drive you're asking for help with. <IMG SRC="smilies/biggrin.gif" border="0">