|
-
October 12th, 2001, 11:45 PM
#1
a question for all you case modders
ok, this might not be a concern, but it was brought to my attention by a electronics tech with 20+ years exp. Will cutting a large hole in a case for a window, possibly cause RF or electrical interference in near by electronic components such as cordless phones, audio/video equipment, or cause the computer to pick up interference from the same types of items? Basically, if you added a window in your case, have you noticed anything of the like?
Dan
-
October 13th, 2001, 09:04 AM
#2
-
October 13th, 2001, 12:38 PM
#3
<font face="Tahoma, Arial, Helvetica, Verdana, Geneva" size="2">Originally posted by brewmandan:
ok, this might not be a concern, but it was brought to my attention by a electronics tech with 20+ years exp. Will cutting a large hole in a case for a window, possibly cause RF or electrical interference in near by electronic components such as cordless phones, audio/video equipment, or cause the computer to pick up interference from the same types of items? Basically, if you added a window in your case, have you noticed anything of the like?
Dan</font>
I've never really seen this as a concern before. You, of course, already have many smaller holes in your case which would already affect this. I've had windows in my case for a long time and it hasn't caused any noticeable problems since they were made. Just my opinion but I'm not an expert
------------------
I feel like a little worm on a big f*****g hook.
-
October 13th, 2001, 09:25 PM
#4
thanks for the input. I did a little "test" by removing the side panel from the case and operated many of my electronic goodies close to the machine without noticing anything odd other than fan noise. now my wife thinks Im odd since she was volunteered into the walkie talkie test... lol
2 cordless phones, walkie talkies, handheld scanner, cell phone, stereo, and guitar amp had no noticable affects on or from the machine...
Dan
-
October 14th, 2001, 06:46 AM
#5
I tend to run my case in 'totally disassembled' state (sides and front off, mobo tray sticking out the back), doesn't make any difference.
------------------
It's supposed to do that... and that... hmmmmm... probably not.
-
October 14th, 2001, 07:35 AM
#6
<font face="Tahoma, Arial, Helvetica, Verdana, Geneva" size="2">Originally posted by 3faze:
I tend to run my case in 'totally disassembled' state (sides and front off, mobo tray sticking out the back), doesn't make any difference.
</font>
Thats true too...what about all the test benches with the puters that don't have sides at all....never heard complaints there...thanks for the test, it was a good question!
------------------
Go big...or go home! 
-
October 15th, 2001, 03:34 PM
#7
I think you need to worry about how much interference your computer gives off not how much other things give off that will effect the computer. Since your computer will give off more interference than almost everything around the computer. That’s why some monitors cannot have a computer next to it or it starts to turn purple.
------------------
Stop bustin my chops!
Ill do it!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks