|
|
|
|||||||
| Intel Ask your Intel questions about overclocking, board settings and benchmarking. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
April 1st, 2001, 09:32 AM
|
#1 |
|
Guest
Posts: n/a
|
[RESOLVED] Intel 82801BA/BAM SMBus Controller-2443
Just did a clean Win 2K install on a new Compaq 1.4 Ghz P4. Have one problem device that Device Manager shows as a 'PCI Device' under 'Other Devices'.
'Problem Device' under 'System Info' shows as "PCI Device PCI/VEN_8086&DEV_2443&SUBSYS__47428086&REV_02\3&61AAA-1&0&FB 22". Device Manager under Win Me showed this device as "Intel 82801BA/BAM SMBus Controller-2443". I am looking for a driver for this device. Will appreciate any help you can provide. Thanks, Frank |
|
|
April 2nd, 2001, 10:37 PM
|
#2 |
|
Registered User
Join Date: Feb 2001
Location: Ohio
Posts: 143
|
Check this page for all the latest Win2k drivers for the MB. http://developer.intel.com/design/mo...b/gb_drive.htm
|
|
|
|
February 5th, 2005, 06:32 PM
|
#3 |
|
Registered User
Join Date: Feb 2005
Location: Boise, ID
Posts: 1
|
I have ran into this problem alot. Mostly with fresh installs(non-imaged) of 2k and XP. It's extremely common for this to happen on any pre-manufactured/commercial machines as they assume you will just use the recovery disk to re-image the HD. I hate using those recovery disks because most of the time they have alot of junk installed you dont really need.
Here is the link to Intel's solution: http://www.intel.com/support/chipsets/sb/cs-013541.htm |
|
|
|
|
October 10th, 2007, 01:20 PM
|
#4 | |
|
Registered User
Join Date: Oct 2007
Posts: 1
|
please help me to download driver
Quote:
|
|
|
|
|
Linear Mode
