[RESOLVED] IBM 760XD problem

January 15th, 2001, 12:17 PM

Got one of the IBM ThinkPad 760 XD's. Starts up, starting loading Windows, turns off in the middle of loading it. Reports an error code 19h on indicators. The only way to restart it then is either to reset it with the button at the back or pull the battery out. The question is : what is going on with it and is there a way to fix it?

*Damned Angel* · January 15th, 2001, 07:57 PM

I took a look at IBM's site, nothing specific about that error code. Couple of things to try- remove all pcmcia cards and any memory upgrade modules installed in unit. try booting to safe mode-if it goes, maybe a driver issue. Also may just be a faulty system board.

hope this helps

January 16th, 2001, 09:15 AM

Even tried to remove battery and CD ROM - same thing. It does work in kind of BIOS thing, but as soon as I try to start Windows, Windows Safe Mode, MS DOS mode even with if I have Windows Start Up menu - it shuts of in about 20 seconds.

*Damned Angel* · January 16th, 2001, 10:30 AM

have you scanned it for viruses? when you say it does the same thing when booting to dos, is this from a dos disk, or just selective startup? If it is just selective startup, try booting from a dos disk and run scandisk or virus scanner on it.

January 15th, 2001, 12:17 PM	#1
ArtemK Guest Posts: n/a	IBM 760XD problem Got one of the IBM ThinkPad 760 XD's. Starts up, starting loading Windows, turns off in the middle of loading it. Reports an error code 19h on indicators. The only way to restart it then is either to reset it with the button at the back or pull the battery out. The question is : what is going on with it and is there a way to fix it?

January 15th, 2001, 07:57 PM	#2
Damned Angel MegaMod Join Date: Aug 1999 Location: Winnipeg, MB Posts: 2,582	I took a look at IBM's site, nothing specific about that error code. Couple of things to try- remove all pcmcia cards and any memory upgrade modules installed in unit. try booting to safe mode-if it goes, maybe a driver issue. Also may just be a faulty system board. hope this helps __________________ "we're all amateurs, it's just that some of us are more professional about it than others" ----George Carlin The above post is © Damned Angel 1999-Present

January 16th, 2001, 10:30 AM	#4
Damned Angel MegaMod Join Date: Aug 1999 Location: Winnipeg, MB Posts: 2,582	have you scanned it for viruses? when you say it does the same thing when booting to dos, is this from a dos disk, or just selective startup? If it is just selective startup, try booting from a dos disk and run scandisk or virus scanner on it. __________________ "we're all amateurs, it's just that some of us are more professional about it than others" ----George Carlin The above post is © Damned Angel 1999-Present

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 16th, 2001, 09:15 AM	#3
ArtemK Guest Posts: n/a	Even tried to remove battery and CD ROM - same thing. It does work in kind of BIOS thing, but as soon as I try to start Windows, Windows Safe Mode, MS DOS mode even with if I have Windows Start Up menu - it shuts of in about 20 seconds.