IBM Thinkpad Security Model A21M

Jstras · January 10th, 2002, 10:05 AM

This is my first posting on the board.

I have a customer that brought me a thinkpad model a21m. The machine has a security lock on it and will not allow any access: not from floppy, CD or hard disk, not even a BIOS setup. He claimed a terminated employee had it and "forgot" the password. The machine does its power up checks and then drops into security mode. In the upper left corner of the screen appears the number 1, under the number is a flowchart symbol for a hard drive, to the right of these is a padlock in the locked position and to the right of that is a flashing cursor with an entry line for a seven digit password. The salesman that I talked to told me it was impossible to crack. If this is level 2 security only a hard drive change can beat it, if this is level 3 security then a system board change is needed. Either of these is too expensive. Does anyone know how to get into this machine? I don't mind sending it to IBM even, as long as it is not too much money.

Thanks,

MacGyver · January 10th, 2002, 10:20 AM

You should look at this thread: <a href="http://forums.windrivers.com/cgi-bin/forum3/noncgi/ultimatebb.php?ubb=get_topic&f=32&t=000327" target="_blank">http://forums.windrivers.com/cgi-bin/forum3/noncgi/ultimatebb.php?ubb=get_topic&f =32&t=000327</a>

Same situation as you. What I figure is that IBM has some sort of proprietary encryption and locking scheme based in hardware on both the main board and hard drive. The guy in this thread was able to get a replacement HD and recovery CD without any problems, if you're trying to recover the data of the HD, it may be another story.

Oodball · January 10th, 2002, 10:47 PM

IBM has chip based security going on here. You need to have the drive and or MB rescanned with the proper credentials to unlock, or have the master power on and BIOS passwords. It really sux for users who really need it unlocked, but it is good for corp. security if the laptop gets stolen. If it really does belong to the guys company, than it is registered with IBM and his tech dept would know the master password for that model.

January 10th, 2002, 10:05 AM	#1
Jstras Junior Member Join Date: Jan 2002 Location: Miami, Florida Posts: 1	IBM Thinkpad Security Model A21M This is my first posting on the board. I have a customer that brought me a thinkpad model a21m. The machine has a security lock on it and will not allow any access: not from floppy, CD or hard disk, not even a BIOS setup. He claimed a terminated employee had it and "forgot" the password. The machine does its power up checks and then drops into security mode. In the upper left corner of the screen appears the number 1, under the number is a flowchart symbol for a hard drive, to the right of these is a padlock in the locked position and to the right of that is a flashing cursor with an entry line for a seven digit password. The salesman that I talked to told me it was impossible to crack. If this is level 2 security only a hard drive change can beat it, if this is level 3 security then a system board change is needed. Either of these is too expensive. Does anyone know how to get into this machine? I don't mind sending it to IBM even, as long as it is not too much money. Thanks,

January 10th, 2002, 10:47 PM	#3
Oodball Registered User Join Date: Dec 2001 Location: OHIO USA Posts: 17	IBM has chip based security going on here. You need to have the drive and or MB rescanned with the proper credentials to unlock, or have the master power on and BIOS passwords. It really sux for users who really need it unlocked, but it is good for corp. security if the laptop gets stolen. If it really does belong to the guys company, than it is registered with IBM and his tech dept would know the master password for that model. __________________ SYSTEM SPECS++++ Win 2000 SP2, AMD Thunderbird 1.4, 512MB true CAS 2-2-2 DDR @266MHz, ECS K7S5A w/onboard SIS LAN, 40GB WD 7200 ATA100, SB Audigy, Voodoo 4 4500, HP 10x4x32, Kenwood 72x true zen cdrom, 8X LG DVD, SYQuest 230 ezflyer scsi2, 1200sp scsi2 scanner, Iomega 100 zip drive, HP 525 Jornada w/ 256MB CF card and with USB and IR link working {email me to find out how to use usb with the 525}, Linksys 4 port router, Nokia 17" trinitron monitor, Genicom 7170 17ppm full duplex laser printer w 2-250 paper trays, HP 722c Deskjet, epson stylus 400.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 10th, 2002, 10:20 AM	#2
MacGyver Registered User Join Date: Oct 2000 Location: Ottawa Posts: 4,231	You should look at this thread: <a href="http://forums.windrivers.com/cgi-bin/forum3/noncgi/ultimatebb.php?ubb=get_topic&f=32&t=000327" target="_blank">http://forums.windrivers.com/cgi-bin/forum3/noncgi/ultimatebb.php?ubb=get_topic&f =32&t=000327</a> Same situation as you. What I figure is that IBM has some sort of proprietary encryption and locking scheme based in hardware on both the main board and hard drive. The guy in this thread was able to get a replacement HD and recovery CD without any problems, if you're trying to recover the data of the HD, it may be another story.