data corruption

weazel · January 27th, 2001, 12:11 AM

i'm just wondering what could possibly cause data corruption over a 4 computer LAN.
tcp/ip and netbeui are installed on all the computers...computers are connected to a linksys 4 port switch...zonealarm is installed but shutdown between systems transferring files (tried to copy files with ZA open and permissions set but got corruption so i closed it but still get corruption)...data corruption occurs on all systems no matter what system copies files...there doesn't seem to be any issue of collision or undo network broadcasting so i'm kind of stumped...all systems are running windows ME and systems vary in configuration from duron, pIII, PII, and celeron with varying amounts of memory all the nics are different but all are detected by the switch as 100mbs....tried different cables and other nics so i'm not sure what else to check...any input from you guys/girls would be appreciated...thanks

January 27th, 2001, 10:41 AM

This sounds like you either have a bad switch or WinME is the culprit.

Try a different switch or hub.

Also, make sure you've unbound TCP/IP for Printer and File Sharing and are only using NetBEUI for that function. Having both bound to Printer and File Sharing may be causing an internal conflict between protocols in WinME. I've never seen this problem on Win9x, WinNT, or W2K peer-to-peer networks...

------------------
Sometimes computer problems require extreme measures. Our hero, the Intrepid Spaceman Spiff, sets his blaster on "deep fat fry..."

January 27th, 2001, 12:11 AM	#1
weazel Registered User Join Date: Jun 2000 Location: USA Posts: 783	data corruption i'm just wondering what could possibly cause data corruption over a 4 computer LAN. tcp/ip and netbeui are installed on all the computers...computers are connected to a linksys 4 port switch...zonealarm is installed but shutdown between systems transferring files (tried to copy files with ZA open and permissions set but got corruption so i closed it but still get corruption)...data corruption occurs on all systems no matter what system copies files...there doesn't seem to be any issue of collision or undo network broadcasting so i'm kind of stumped...all systems are running windows ME and systems vary in configuration from duron, pIII, PII, and celeron with varying amounts of memory all the nics are different but all are detected by the switch as 100mbs....tried different cables and other nics so i'm not sure what else to check...any input from you guys/girls would be appreciated...thanks __________________ #3 1951-2001

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 27th, 2001, 10:41 AM	#2
StevePorter Guest Posts: n/a	This sounds like you either have a bad switch or WinME is the culprit. Try a different switch or hub. Also, make sure you've unbound TCP/IP for Printer and File Sharing and are only using NetBEUI for that function. Having both bound to Printer and File Sharing may be causing an internal conflict between protocols in WinME. I've never seen this problem on Win9x, WinNT, or W2K peer-to-peer networks... ------------------ Sometimes computer problems require extreme measures. Our hero, the Intrepid Spaceman Spiff, sets his blaster on "deep fat fry..."