|
|
|
|||||||
| Networking Have a networking problem, connectivity issues, LAN/WAN probs? |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
February 14th, 2001, 10:05 PM
|
#1 |
|
Guest
Posts: n/a
|
My PC reboots when I transfer files to it from the network!
I just build a new PC from some new/old parts(366mhz AMD k6-2, 32mb 72 pin RAM (non EDO), Soyo Mobo with built in graphics (2mb shared) and sound, 10/100 Realtech NIC) and I am running Win ME and it is giving me the oddest errors. It will reboot when I try to send files of any decent size to it (like over 10mb). If it does not reboot it gives me an error that says "an unknown error has occurred". Anyone ever experience this before?
PS - My PC's connect via a 10/100 auto sensing switch/router by Linksys. ------------------ now type format c: and press enter and you will never have a pc problem ever again... |
|
|
February 15th, 2001, 12:39 PM
|
#2 |
|
Registered User
Join Date: Jul 2000
Location: Huntington Beach, CA, USA
Posts: 1,515
|
What are the settings of the NIC - ie. What protocol are you using, and what are your speed/duplex settings? Are they the same as the other card? Try setting both to 100/half duplex.
------------------ Death is lighter than a feather - duty heavier than a mountian.
__________________
Death is lighter than a feather - duty heavier than a mountian. The answer to your question is: 00110100 00110010 |
|
|
|
February 15th, 2001, 09:11 PM
|
#3 |
|
Guest
Posts: n/a
|
Someone earlier had the same problem. It turned out to be the motherboard. It was an abit kt7a.
tk421 ------------------ www.mp3.com/stairwell |
|
|
|
February 19th, 2001, 10:07 AM
|
#4 |
|
Registered User
Join Date: Jan 2000
Location: New London,CT,USA
Posts: 296
|
Had a problem with a couple soyo boards, I would suspect the NIC on this one, if possible try swapping the cards
 ------------------ I'm on the right track but the wrong train...or is it the right train but wrong track ?
__________________
Where's that smoke coming from ? |
|
|
|
|
February 24th, 2001, 12:29 PM
|
#5 |
|
Guest
Posts: n/a
|
I'll try these things and let you know. Thanks!
------------------ now type format c: and press enter and you will never have a pc problem ever again... |
|
|
|
February 28th, 2001, 04:20 PM
|
#6 |
|
Guest
Posts: n/a
|
i get the same type of problem only mine is when i go to download off of my laptop which is on whistler to my desktop on 98se computer restats and locks up know i have been doing scan disk on it and for the past 2 hours its been checking for crosslinked files
aghhhhhh ------------------ How do I set my laser printer to "stun"? I can't back up my hard drive, there's no reverse button. |
|
|
|
March 1st, 2001, 10:01 PM
|
#7 |
|
Guest
Posts: n/a
|
Well, i tried changing the nic's settings so that it was at 10 full/half 100 full/half and nothing worked.
The CD burner was giving errors for every cd. FDISKed it and put 95 version c on it and it doesn't boot at all now. I'm beginning to think is hardware based... ------------------ now type format c: and press enter and you will never have a pc problem ever again... |
|
|
|
March 4th, 2001, 05:01 AM
|
#8 |
|
Registered User
Join Date: Aug 2000
Location: Tel Aviv Israel
Posts: 2,159
|
Don't Format!
I had the same problem when i used the Same above Config with Norton Antivirus! If you are using it Remove it and check it! ------------------ ************************* It Works Better if you Plug it in, It Works far better if you Turn it ON!
__________________
Real stupidity beats Artifical Intelligence Avatar courtesy of A D E P T |
|
|
|
Linear Mode
