[RESOLVED] Freecom 8x4x32 - DOS Drivers ?

[Camikaze]

Hey All,
I have been unable to find DOS drivers for this drive anywhere.

They do not appear to be on the CD which came with the drive or on the freecom web site

Can anyone help ?

Thanks

Cya

[MAC]

I always use a file called v330_11c.sys for all CD drives in DOS. Never failed me yet. You can find it by going to yahoo and searching for the file name. Download and add command lines to your config.sys and autoexec.bat. The following lines will only work if you download the file to a directory called DOS.

Config.sys
device=c:\dos\v330_11c.sys /d emcd420
Autoexec.bat
c:\windows\command\mscdex.exe /d emcd420


hope this helps. Mark


[This message has been edited by MAC (edited February 28, 2001).]

[Camikaze]

Hey,
Thanks for the reply.
I have found the file and downloaded it.

Now A Few Questions

You say this will only work If I place it in a folder called dos. Presumably if I change the \dos\ to where I put the file it will work yeah ?

Secondly, I have a CD-ROM Drive also without drivers. Can I use that file to provide drivers for both drives ? Or Do I need to do something else ?

Thanks

Cya