UDF Service

Russ192 · January 23rd, 2002, 07:40 AM

The following error is reported in the logs on system-start. Im unable to view cd's normally read by the UDF reader. How do i correct this?

Thanks for any help

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7026
Date: 22/01/2002
Time: 13:01:53
User: N/A
Computer: (Removed)

Description:
The following boot-start or system-start driver(s) failed to load:

cdudf_XP
UdfReadr_xp

Eagle PC Diagnostech · January 23rd, 2002, 04:03 PM

Did you upgrade to XP or was this a clean install?

Russ192 · January 25th, 2002, 05:11 AM

Yea it was an upgrade from 98 to XP Home then from XP Home to XP Pro! So no not at all a clean install at all!

Eagle PC Diagnostech · January 25th, 2002, 08:16 AM

What CD Burning program did you have installed before the upgrade?
Did you install the UDF Reader before the upgrade?
It might not be compatible with XP, so you might have to uninstall or upgrade it.
Or you might be able to stop the service from running, if it's listed, by going into administrative tools/services, find the UDF Service and set it to manual or disable upon startup.

Russ192 · January 26th, 2002, 04:58 AM

No CD-Burning software was installed before upgrade, UDF Reader was not installed either. Ill stop the service for now i think

DJ Specs · January 26th, 2002, 03:06 PM

Here, if you need to "SEE" the CD's, use this program, it works great!
<a href="http://www.isobuster.com" target="_blank">www.isobuster.com</a>
That should help until you can figure out whats wrong.

January 23rd, 2002, 07:40 AM	#1
Russ192 Registered User Join Date: Apr 2000 Posts: 108	UDF Service The following error is reported in the logs on system-start. Im unable to view cd's normally read by the UDF reader. How do i correct this? Thanks for any help Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7026 Date: 22/01/2002 Time: 13:01:53 User: N/A Computer: (Removed) Description: The following boot-start or system-start driver(s) failed to load: cdudf_XP UdfReadr_xp

January 23rd, 2002, 04:03 PM	#2
Eagle PC Diagnostech Registered User Join Date: Jun 1999 Location: Las Vegas, Nevada Posts: 1,109	Did you upgrade to XP or was this a clean install? __________________ An obstacle is something you see when you take your eyes off your goal.

January 25th, 2002, 08:16 AM	#4
Eagle PC Diagnostech Registered User Join Date: Jun 1999 Location: Las Vegas, Nevada Posts: 1,109	What CD Burning program did you have installed before the upgrade? Did you install the UDF Reader before the upgrade? It might not be compatible with XP, so you might have to uninstall or upgrade it. Or you might be able to stop the service from running, if it's listed, by going into administrative tools/services, find the UDF Service and set it to manual or disable upon startup. __________________ An obstacle is something you see when you take your eyes off your goal.

January 26th, 2002, 03:06 PM	#6
DJ Specs Registered User Join Date: May 2001 Location: Vancouver, BC, Canada Posts: 75	Here, if you need to "SEE" the CD's, use this program, it works great! <a href="http://www.isobuster.com" target="_blank">www.isobuster.com</a> That should help until you can figure out whats wrong. __________________ Oh Iz Dat Rite, Eh?!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 25th, 2002, 05:11 AM	#3
Russ192 Registered User Join Date: Apr 2000 Posts: 108	Yea it was an upgrade from 98 to XP Home then from XP Home to XP Pro! So no not at all a clean install at all!

January 26th, 2002, 04:58 AM	#5
Russ192 Registered User Join Date: Apr 2000 Posts: 108	No CD-Burning software was installed before upgrade, UDF Reader was not installed either. Ill stop the service for now i think