|
-
August 20th, 2004, 06:38 AM
#1
Registered User
Realtek ALC658 Problem
Hi all,
I have Realtek ALC658 built-in sound card, it runs fine with everything, i have also Creative Inspire 4.1 Speakers, the problem is that the driver doesn't detect the rear speakers, here's a view of the problem:

I tried switching the connectors but the same problem persists, i hope someone help me, cause i have sent to Realtek and GigaByte a million times with no effective reply, just "check this, check that, warranty ....etc.", and i noticed that this problem was in other boards too, but it wasn't there with with my previous one (ALC650) or the Avance chips in Asus boards, thanks.
-
August 21st, 2004, 07:41 AM
#2
Driver Terrier
Welcome to Windriver os008
Have you checked your speakers on another machine?
are you using the realtek drivers?
In some motherboards there are jumpers on the motherboard to allow 4.1/5.1 sound, otherwise it just puts out stereo - have you checked the motherboard manual for this?
-
August 21st, 2004, 11:58 AM
#3
Registered User
 Originally Posted by NooNoo
Welcome to Windriver os008
Have you checked your speakers on another machine?
are you using the realtek drivers?
In some motherboards there are jumpers on the motherboard to allow 4.1/5.1 sound, otherwise it just puts out stereo - have you checked the motherboard manual for this?
Hi,
Thanks for your reply, yes i had these speakers running on other machines, and even on this machine with different MB, i have the latest Sound Drivers from Realtek, i'll check the jumper setting and return to u, brb.
***EDIT: i checked for the jumper, there're some jumpers for the front panel connectors, which disables the rear panel (normal ones) when removes, but with no use if played with, the problem is that it ALWAYS detects anything connected to the rear as Line In, i don't know y , thanks anyway.
Last edited by os008; August 21st, 2004 at 12:38 PM.
-
August 22nd, 2004, 05:44 AM
#4
Driver Terrier
and you have set the software for 4.1 sound? What about the bios?
-
August 23rd, 2004, 02:20 AM
#5
Registered User
 Originally Posted by NooNoo
and you have set the software for 4.1 sound? What about the bios?
nothing there, except enabling and disabling the AC97 CoDec!
-
August 24th, 2004, 04:49 AM
#6
Driver Terrier
What about the software configuration for sound in windows? Have you checked in the multimedia applet in control panel?
Do you get standard stereo?
Similar Threads
-
By acord in forum Windows 95/98/98SE/ME
Replies: 3
Last Post: March 18th, 2004, 04:37 PM
-
By Mrdyg in forum Tech-To-Tech
Replies: 7
Last Post: October 14th, 2001, 04:39 PM
-
By ph1sh in forum Video Adapter/Monitor Drivers
Replies: 6
Last Post: May 14th, 2001, 10:10 AM
-
By WestleyL in forum Windows 95/98/98SE/ME
Replies: 3
Last Post: March 13th, 2000, 02:54 AM
-
By jpaul in forum Video Adapter/Monitor Drivers
Replies: 0
Last Post: November 10th, 1999, 03:45 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks