I am new to the forum and this is my first post. I have search and read the material I could find but could not resolve.

I am using XP, Nero 7 Burning ROM. What I was trying to do was simply use DVDs and Nero to backup data. I have tried numerous computations with little success. I have been able to backup two disks but not the third, which has video files but well within the limit size of the DVD. I even tried taking one computation that worked [I was successful burning], then deleting some files to make room, then adding a copy of videos. Failed again. From the first to the last, I changed my DMA on the primary IDE [I have two plus one secondary] by deleting the second primary IDE channel and rebooting as the setting for it seemed wrong; no change. BTW, my Advanced tab in all settings has nothing for Device 1, only for Device 0.

Now the strange part. It always crashes at 10 minutes 4 seconds from the start?? I have pasted below a few on the logs to see if this might add more information, or maybe others have had this same problem and have solved it. I have since learned that this post is too long so will add the other two logs separately. [This one is the first failure, the next post the second, and the third and last is a successful burn. Also, I have tried reducing the write speed down to 4X's which is the lowest available but regardless of where and when I change it [from the NEW setup to just before I burn], it always says 16Xs when it starts to burn?? Not sure.

Any help or direction you could give would be very much appreciated.

Thanks.

First burn failure log:
1C80-0010-8010-0000-0003-0535-0074

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 11:54:32 AM

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A100 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <GJ5211B MDV008R >Version: 1.0 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: Off
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 2 ID 0 DMA: On
DiskPeripheral : MAXTOR 6L080J4 A93. iteraid Port 3 ID 2 DMA: Off
CdRomPeripheral : GJ5211B MDV008R 1.0 dtscsi Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B D: CDRom0
GJ5211B MDV008R F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047788kB)
Free physical memory: 363MB (372452kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

30.1.2007
UDF compilation
6:22:48 PM #1 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Revision : 1.02
UDF Partition Type : physical

6:22:49 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

6:22:49 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

6:22:49 PM #4 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVDRAM GSA-4163B running

6:22:52 PM #5 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media

6:22:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1801551 (400:20.51, 3518MB)

6:22:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

6:22:53 PM #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193

6:22:53 PM #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:22:53 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1801552 (1801552) = #1801552/400:20.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1801552 blocks [D: HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

6:22:53 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3689578496, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1801552 | lead-out | 1 | 0x41 | 0x00

6:22:53 PM #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

6:22:53 PM #13 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

6:22:53 PM #14 Text 0 File Burncd.cpp, Line 4176
Cache writing successful.

6:22:53 PM #15 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

6:22:53 PM #16 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 16x (22,160 KB/s)

6:22:53 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:22:53 PM #18 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

6:22:53 PM #19 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

6:22:53 PM #20 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

6:22:53 PM #21 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:32:57 PM #22 SPTI -600 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x06270000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

6:32:57 PM #23 CDR -600 File Writer.cpp, Line 302
Device not available
D: HL-DT-ST DVDRAM GSA-4163B

6:32:57 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

6:32:57 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

6:32:58 PM #26 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1

6:32:58 PM #27 CDR -1114 File WriterStatus.cpp, Line 167
Reset occurred
D: HL-DT-ST DVDRAM GSA-4163B

6:32:58 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

6:32:58 PM #29 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 16x (22,160 KB/s)


Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 1/10/2003 12:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/11/2004 9:19:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 9:59:41 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)