[RESOLVED] Diamond Multimedia MX300

July 2nd, 1999, 01:00 AM

I have never really like Diamond products because they charge too much for them, but I have a customer that just luvs the stuff...he has a mx300, when I install the drivers for it, windows will not boot, it just reboots, go into safe mode, remove the drivers, it boots fine. What can fix this?

------------------

July 9th, 1999, 04:11 PM

Sounds like a resource conflict. Try forcing the IRQ for the MX300 to a specific address in the BIOS. If it has to share an IRQ with another device, make sure it doesn't share with a HD controller.

July 2nd, 1999, 01:00 AM	#1
Wurny Guest Posts: n/a	Diamond Multimedia MX300 I have never really like Diamond products because they charge too much for them, but I have a customer that just luvs the stuff...he has a mx300, when I install the drivers for it, windows will not boot, it just reboots, go into safe mode, remove the drivers, it boots fine. What can fix this? ------------------

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

July 9th, 1999, 04:11 PM	#2
Stuart Harms Guest Posts: n/a	Sounds like a resource conflict. Try forcing the IRQ for the MX300 to a specific address in the BIOS. If it has to share an IRQ with another device, make sure it doesn't share with a HD controller.