|
-
April 30th, 2002, 04:15 PM
#1
Avatar Goes Here
 PSU for GF4
I have a GeForce 4 Ti4400 made by PNY on a 300watt system and was thinking of adding one to my other system with a 250watt power supply, on thier site they say that it is required to have a 300watt. Does anyone know if this is critical or if they just say that for a "safety net" for the people that have 100 things in a low power system.
The system that I am thinking of adding it to is a P4 with 1 cd drive and 1 hdd, stock cooler and 1 case fan. 1 nic and 1 modem. Think it will handle it?
:::Asus A8N-Sli Premium:::AMD 3500+ @ 2.4ghz:::2x80GB 8mb cache RAID0 Array:::GeForce 7800GTX OC:::2GB Corsair XMS Memory:::500 Watt Enermax Liberty PSU:::16x Lite-on DVDRW:::
Counter Strike Source Forum and Server @ http://www.nvpclan.com -=Ninjas Vs. Pirates=-
-
May 1st, 2002, 03:28 PM
#2
Avatar Goes Here
-
May 1st, 2002, 04:19 PM
#3
Registered User
i once had a gateway with a 200W psu that would not take a tnt2 ultra until we upgraded the psu. if PNY says it needs a 300W, i go by that. you could however, try it on the 250 and if it didn't work, replace it. 300W psu aren't that much anymore.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Reply With Quote
Bookmarks