Jumper Settings for Tvga 8900 D? HELP!

[maestro7]

Please can anyone tell me where I can possibly find the jumper settings for this old isa card. It has 1024K of memory and when the bios flashes info upon power on I see that it is 32-bit? It has a bios version of C4.5 (01) if that helps. Upon doing a search I found the jumper settings for a 8900 CL are these settings the same for the "D" card. Any help would be appreciated!

[gospelmidi]

J1 is closed for interlaced display, default scan rate. (Default setting)
J1 is open for non-interlaced display, scan rate up to 48.7KHz.

If you have problems booting your system, set J2 to disable autodetect, or place the card in an 8-bit slot and set J4, J5, J6 according to the table 2.2.

[Table 2.2 lists only the setting for J1.]