 |
|
12-10-2000, 11:51 AM
|
#1 |
|
Guest
Posts: n/a
|
SnapScan 1212p drivers wanted !!!
If you find the drivers of SnapScan 1212p for windows 2000 wright me to barbarafly@libero.it
|
|
|
02-14-2001, 06:30 PM
|
#2 |
|
Guest
Posts: n/a
|
Hi, I also have a 1212p Agfa scanner and would likre the Windows 2000 drivers for it. I noticed that your message on the forum is from December 2000, so I thought I would ask if you have had any luck? Please let me know how you got on.
tdtazmania@hotmail.com |
|
|
|
02-16-2001, 10:07 AM
|
#3 |
|
Guest
Posts: n/a
|
Beta Drivers can be found at http://www.agfa.com/betasoftware/
It took a lot of fiddling around, but I got these to work in the end. I had problems with the parallel port. Agfa say your port should be set as EPP, but I couldn't get it to work. In the end I had to flash the bios on my Abit BH6 motherboard, then reset the parallel port to ECP+EPP and then everything worked. Hope this helps. tdtazmania |
|
|
|
02-29-2004, 04:01 PM
|
#4 |
|
Registered User
Join Date: Feb 2004
Posts: 1
|
It works
Install the newest xp driver from agfa,instals from kontrolpanel after the fil is uncompresed.
Then instal your original ScanWise program, not the one included with the new driver. |
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
