Drivers for Matsu****a LF-1195c

12-29-1999, 04:39 PM

I have obtained a few surplus PD drives manufactured by Matsu****a. I am trying to locate the drivers for them. Can anyone help. The model number is LF-1195C and they originally were installed in Compaq Deskpros (unsure of the model number). They were manufactured in Feb 1997.

01-01-2000, 11:45 AM

I have a LF-1194 I'm looking for an NT driver for. Are these similar drives? Do yours have a SCSI interface? I think I say a note about these drives that refered a person to compaq's driver site. Maybe do a search on www.driverguide.com

I've have no luck with my 1194 so far, but have seen info on your's, just don't know the difference. and I believe what I saw was for Win95, no NT.

Egon · 01-28-2000, 07:30 AM

I have a Matsu****a LF-1195C PD drive too (IDE). Drivers can be obtained from the Compaq Support Homepage - http://www.compaq.com/support/files/index.html. You have to look for drivers for the Deskpro 6000, which was equiped with this PD drive.

My LF-1195C drive works fine the first moment, but after writing a few Mb of data to the PD, it becomes very, very slow. I tried several different PD-disks, so this is not the reason. I also tried the MS-DOS driver and the Windows 95 driver and it occurs in both configurations. Does anybody have an idea how to fix?

12-29-1999, 04:39 PM	#1
Theatrix Guest Posts: n/a	Drivers for Matsua LF-1195c I have obtained a few surplus PD drives manufactured by Matsu****a. I am trying to locate the drivers for them. Can anyone help. The model number is LF-1195C and they originally were installed in Compaq Deskpros (unsure of the model number). They were manufactured in Feb 1997.

01-28-2000, 07:30 AM	#3
Egon Junior Member Join Date: Aug 2001 Location: Amsterdam, Netherlands Posts: 1	I have a Matsu****a LF-1195C PD drive too (IDE). Drivers can be obtained from the Compaq Support Homepage - http://www.compaq.com/support/files/index.html. You have to look for drivers for the Deskpro 6000, which was equiped with this PD drive. My LF-1195C drive works fine the first moment, but after writing a few Mb of data to the PD, it becomes very, very slow. I tried several different PD-disks, so this is not the reason. I also tried the MS-DOS driver and the Windows 95 driver and it occurs in both configurations. Does anybody have an idea how to fix? __________________ ----------------------------------------- <br />"Imperious, choleric, irascible,<br />extreme in everything,<br />with a dissolute imagination of the like<br />which has never been seen,<br />atheistic to the point of fanaticism,<br />there you have me in a nutshell<br />and kill me again or take me as I am,<br />for I shall not change, never."<br />(De Sade)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

01-01-2000, 11:45 AM	#2
georgescott Guest Posts: n/a	I have a LF-1194 I'm looking for an NT driver for. Are these similar drives? Do yours have a SCSI interface? I think I say a note about these drives that refered a person to compaq's driver site. Maybe do a search on www.driverguide.com I've have no luck with my 1194 so far, but have seen info on your's, just don't know the difference. and I believe what I saw was for Win95, no NT.