Display problem after installing WIN95

06-27-1999, 12:25 PM

I have installed WIN95 on my Pentium 60 recently. However, when I rebooted my computer after the installation, there's no display on the screen. All I got is a few blinking lines in the middle of the screen. I am wondering is this a hardware imcompatiblity problems or I need to install a new vider driver. I know that the computer is using a Trident TGUI9440A Gi graphic card. Before the installation, it ran on WIN 3.11 (workgroup) and the display was fine.
If anyone can help me, it is much appreciated.

07-26-1999, 04:38 PM

Haz,

I have run into the same problem. After the blank screen, try a reboot...windows 95 should recognize that you have the wrong driver...a win311 driver is not the same as a win95...and it will prompt you to update. I hope that you can find the upgrade that you need for windows 95...that seems to be my biggest problem with Trident.

08-15-1999, 01:11 AM

Donalyn,

Thanks for you advice, I've reboot as you suggested and it works fine. To get a new drive for you graphic card, you need to find out what manufacturer & model# of your graphic card and search on www.windrivers.com. I've find my Trident driver for Win95 from that web site.

06-27-1999, 12:25 PM	#1
hazels Guest Posts: n/a	Display problem after installing WIN95 I have installed WIN95 on my Pentium 60 recently. However, when I rebooted my computer after the installation, there's no display on the screen. All I got is a few blinking lines in the middle of the screen. I am wondering is this a hardware imcompatiblity problems or I need to install a new vider driver. I know that the computer is using a Trident TGUI9440A Gi graphic card. Before the installation, it ran on WIN 3.11 (workgroup) and the display was fine. If anyone can help me, it is much appreciated.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

07-26-1999, 04:38 PM	#2
Donalyn Guest Posts: n/a	Haz, I have run into the same problem. After the blank screen, try a reboot...windows 95 should recognize that you have the wrong driver...a win311 driver is not the same as a win95...and it will prompt you to update. I hope that you can find the upgrade that you need for windows 95...that seems to be my biggest problem with Trident.

08-15-1999, 01:11 AM	#3
hazels Guest Posts: n/a	Donalyn, Thanks for you advice, I've reboot as you suggested and it works fine. To get a new drive for you graphic card, you need to find out what manufacturer & model# of your graphic card and search on www.windrivers.com. I've find my Trident driver for Win95 from that web site.