[RESOLVED] win98 setup in hardware detection stops responding

i have a msi-6195 k7pro motherboard 128mb memory ,vodoo banchee 16agp 20gig hd. This is my problem this computer was running win98 fine then out of nowere it would not boot up. Nothing new was installed in the computer no software or hardware. I even took out all the extra pci cards incase but it did not work. All I have now in the pc is memory, hd, video card and the motherboard and cpu. I tried to install formating the hard drive and nothing. It will always frezze (hang) at the same spot tring to detect plug and play. I have run out of options. Help. Also I install win95 fine. I don't have a clue now. helpppppppppp

you might want to check msi web site to see if there is any known proboem with the board and also check for a bios update for the board

When you reinstalled did you fist remove all of the pci and isa cards (excluding video)? I have, in the past, had similar problems that were solved by doing this. If that doesn't work, and the mobo manufacturer's web site doesn't have any info, you may have fried something on the board or memory that has made your computer flaky.

Also, try swaping video cards.

I hope this helps.

I TRIED UPDATING THE BIOS BUT THAT DIDN,T WORK. FOR SOME STRANGE REASON I LOOKED AT MY BIOS SETTING AND CHANGED SOMETHINGS INCLUDING THE USB PORT FOR THE MOTHERBOARD. AND THAT SOLVED MY PROBLEM. THANKS TO ALL FOR HELP THE ONLY THING IS I DON'T THINK I'LL BE ABLE TO USE USB, BUT THATS OK I'LL USE IT ON MY OTHER PC.