I'm pretty new at this stuff so I don't know too much but what kind of case do I get for the P3's and P4's, an AT or ATX?
Printable View
I'm pretty new at this stuff so I don't know too much but what kind of case do I get for the P3's and P4's, an AT or ATX?
Your after an ATX case. Cause all the PIII and P4 mobos will be ATX. AT is a dead form factor.
------------------
Glad its dead,I hate it when the m*f****** wriggling about, makes it hard to stuff the mobo in...
https://forums.windrivers.com/
------------------
_ ___________________ _
Windows, what you throw your PC out of
<<Cause all the PIII and P4 mobos will be ATX. >>
The P4 uses/requires a format called ATX12V if I'm not mistaken....exra power connector on MB for supplying an extra power source for cpu. You will be out of luck with a p4 and a standard ATX case.
Quote:
<font face="Verdana, Arial" size="2">Originally posted by MDD1963:
<<Cause all the PIII and P4 mobos will be ATX. >>
The P4 uses/requires a format called ATX12V if I'm not mistaken....exra power connector on MB for supplying an extra power source for cpu. You will be out of luck with a p4 and a standard ATX case.</font>
i believe you are correct, the best case for the p4 i have seen is the one made by inwin
If you're getting a P3, I love cases by Antec. They're good about sharp edges, have good stand-on-ability https://forums.windrivers.com/ and usually have great accesibilty features. I've got a <a href="http://www.apushardware.com/?action=hardware&id=5">SX1030</a>, only black. It's groooovy. https://forums.windrivers.com/
------------------
Thank you for calling the support desk! How may I disconnect you today?
The AT form factor isn't dead. Ever look at TigerDirect or anything similar. True, ATX is the industry standard but I see alot of AT motherboards at the local PC store. Shuttle makes a good AT board!Quote:
<font face="Verdana, Arial" size="2">Originally posted by Riker!:
Your after an ATX case. Cause all the PIII and P4 mobos will be ATX. AT is a dead form factor.
</font>
------------------
He who gives up liberty for security gains neither --Benjamin Franklin
I just bought an antec performance series 1040, it's brill. 4 fans, clip in 5.25 peripherals, 300w p/s. pity the 400w p/s version was not available.Quote:
<font face="Verdana, Arial" size="2">Originally posted by Sparky625:
If you're getting a P3, I love cases by Antec. They're good about sharp edges, have good stand-on-ability https://forums.windrivers.com/ and usually have great accesibilty features. I've got a <a href="http://www.apushardware.com/?action=hardware&id=5">SX1030</a>, only black. It's groooovy. https://forums.windrivers.com/
</font>
the only thing about black, is the peripherals are all standard "cream/grey" !!!
now wouldn't it be good if they were like mobile phones; covers you could change yourself? https://forums.windrivers.com/