-
Apparent CDROM Problems
Hi, I have a problem where every time I insert a CD into my cdrom drive I receive an illegal operation.. An invalid page fault in module autorun.exe at 0167:00404500. I have ruled out memory hardware because I can use all programs on the hard drive/surf the internet etc.. No problems booting up at all. When I place a cd in the drive (Mitsubishi 52x IDE)It attempts to autorun, I then receive the illegal operation. This error can cause the system to be unstable (I have to restart the machine) eveything is fine until i use the cdrom. System specs as follows:- Pentium III 600B Slot 1. Abit VA6 Motherboard, 128mb PC-133 SDRAM, 32mb TNT2 Video Card, 15GB Seagate HDD, 52x Mitsubishi CDROM Drive, Thats basically it. There are no DOS Drivers installed for the CDROM... Any info/help much appreciated. Cheers, Steve
-
You have tried many different CDs right?
Try the following:
- try it on another IDE channel
- try another CDROM drive
- disable any startup crap
I had a problem on an older computer where it reported all CDs as having corrupted files..changing the IDE channel fixed that.
------------------
"I don't care if it's called the Crap-tastic 9000! If it's good, I'm getting it." - Me
https://forums.windrivers.com/ America Rules!
My goal is to help YOU https://forums.windrivers.com/
Antec SX840, AMD Athlon 1400@1584 STABLE, Epox 8K7A+, IBM 60GXP 40GB, 20GB Maxtor 7200RPM, Plextor 16x10x40, Pioneer Slot-Loading DVD-ROM, Yamaha 8x8x24 Firewire CD-RW, Maxtor 80GB external Firewire hard drive, ATI All-In-Wonder RADEON 32MB DDR, Turtle Beach Santa Cruz, Realtek NIC (blech), 1394 card, Thermalright Sk6 with Thermaltake 31cfm
[This message has been edited by Jpbtennisman (edited October 14, 2001).]
-
Have you tried disabling Auto Run in the CDROM Properties?
Then try opening the CDROM through My computer or Explorer.
------------------
https://forums.windrivers.com/ "What works for One person May not work for Another"
God Is My Judge dLagace=DANIMAL
