Printable View
Hiya,
I recently upgraded my PC, I replaced the CPU to a P4 2.40, RAM 512 of DDR and an Intel D845GEBV2. and added a 400 w PS.
The cpu is running between 107 and 111(got it to 122 after playing Iron Storm for two hours)
Isnt this a little hot for a 2.4?
When I was building workstations (the last one I built was a 1.7 which was running in the high 90's.
Whadda you think?
thanks.
El C-
Sounds fine to me mate (as long as we're talking in fahrenheit). Thats not going to do any damage, but if a really hot day comes along and it goes a bit higher, you might look at some arctic silver and/or a better hsf.
Already workin on the heatsink and Fan combo, what's your opinion on the new Vantec?
My case is a bit snug so I may opt for a larger one soon, with more space for fans. (i have a front and a rear now but i mickey moused the rear one in as there is no real spot for it.
Thanks!
C
ah.... which one? if you refer to the VA4-C7040 (not a great chance) then it's a nice one, but beaten by volcano 7+ and so on. Sorry for the brief answer, short on time.
Most I see run ~100F during idle and ~130 under full load
the AVC sunflower has a great design, and seemed to be on par with the Volcano 7+ with less noise..
i would check it out...
here is what i bought, noisy bugger though. But as far as cooling it does the trick.
http://microcenter.com/single_produc...uct_id=0148850
and one of them there pci slot fans...
seems to be ok now
thanks for the help