Printable View
will create network bootdisk to load support for mutliple Network card adapters. What I want is the ability to create a menu, choice to map to different network shares. example of menu:
1. connect to X server
2. connect to Y server
3. connect to Z server
How can I implement a menu selection after initializing network card adapter?
Your help is appreciated.
all the help you need hereQuote:
Originally Posted by ntbluez
http://www.carleton.ca/~dmcfet/menu.html
I used this site to create my really cool ghost boot disk . . . that is still in progress. just follow the instructions and make sure choice.com is on the floppy disk too.
When you get that done I would like a howto or a copy ;) (yes I do have my own copy of ghost)Quote:
Originally Posted by kato2274
I did this then turned it into a bootable cd. We are using two networks cards and pro 100 intel card and a 3com card
heres my code
make a bootable floppy
here is my autoexec.bat
here is the config.sysCode:path=G:\netpro;G:\net3com;G:\pwl;G:\;G:\util
A:\MSCDEX.EXE /D:MSCD000 /L:g
IF "%CONFIG%"=="Pro100" G:\pro100.bat
IF "%CONFIG%"=="3Com" G:\3com.bat
IF "%CONFIG%"=="Pro100old" G:\pro100ol.bat
IF "%CONFIG%"=="3Comold" G:\3comold.bat
IF "%CONFIG%"=="Pro100usb" G:\pro100u.bat
IF "%CONFIG%"=="3Comusb" G:\3comusb.bat
IF "%CONFIG%"=="nc3com" G:\nc3com.bat
IF "%CONFIG%"=="ncpro100" G:\ncpro100.bat
IF "%CONFIG%"=="vscan" G:\av.bat
in the bat files off the cd, once the cd is loaded on drive g:Code:[Menu]
MenuItem=Pro100, Ghost Disk Intel Pro100
MenuItem=3Com, Ghost Disk 3Com
SubMenu=old, Old Ghost Boot Disks...
MenuItem=Pro100usb, Pro100 with USB Support
MenuItem=3Comusb, 3Com with USB Support
MenuItem=ncpro100, Norton Commander with Pro100 Drivers and USB
MenuItem=nc3com, Norton Commander with 3Com Drivers and USB
MenuItem=vscan, McAfee Dos Vrius Scanner
MenuItem=none, Boot into DOS
MenuColor=7,1
MenuDefault=Pro100,20
[Common]
DEVICE=A:\OAKCDROM.SYS /D:MSCD000
files=30
device=A:\ifshlp.sys
lastdrive=z
DEVICE=A:\HIMEM.SYS
DEVICE=A:\EMM386.EXE NOEMS
DOS=HIGH,UMB
[old]
MenuItem=Pro100old, Ghost Disk Intel Pro100 (OLD)
MenuItem=3Comold, Ghost Disk 3Com (OLD)
MenuColor=7,1
MenuDefault=Pro100old,20
[Pro100]
[3Com]
[Pro100old]
[3Comold]
[Pro100usb]
[3Comusb]
[ncpro100]
[nc3com]
[vscan]
[none]
depending on what menu selection you choose it will laod another batch file here is intelold.bat
pretty much it, hope this helps, if you need help with the net setup just postCode:path=G:\intelold;G:\pwl
G:\intelold\net initialize
G:\intelold\nwlink
G:\intelold\net start
echo Drive V: \\riverside\public$
net use v: \\riverside\public$
echo Drive X: \\riverside\images$
net use x: \\riverside\images$
echo Drive Z: \\riverside\programs$
net use z: \\riverside\programs$
x:
echo.
echo Setup Mouse Driver for PS/2
Mouse
g:\RUNMENU.EXE g:\COUNTY.MEN /LARGESTACK
ghost disk is almost done
1st menu offers choice of CD or HD imaging
then the following menus offer backup and restore options.
the ghost drive is determined to be the last fat or fat32 partition before the ramdrive.
example of dos scipting if %ramd% == d set gdrive=c
the cdrom is setup pretty much the same way just goes one letter past the ramdrive
so when I issue the ghost command, the src and dst options are set to variables.
example: ghost -clone,mode=pload,src=%gdrive%:\bakup.gho,dst=1:1
all ghosting is completely automated with command line switches. I'll winimage it and post a link tonight if I get a chance.