Network Connection Lost

Printable View

May 11th, 2001, 11:30 AM
klintman

Network Connection Lost

Two computers (Win98 & Win98SE) are networked together through a hub and the network is established. Then when either computer is rebooted, the network connection between the two is lost. In Network Neighborhood Computer 1 sees itself and computer 2 sees itself, but neither see each other. This problem also may occur when I connect to the Internet. I have to spend hours and hours to reestablish the connection. I normally have to remove all the devices out of Device Manager to get it working again. I am going to try to go into Windows Update and update my Win98 computer or put Win98 SE on that one. Any suggestions?

Thanks.
May 11th, 2001, 12:24 PM
Jallentino

Have you tried replacing the NIC's ?
May 11th, 2001, 10:13 PM
klintman

Yes. Returned the NICs and got new ones.
May 12th, 2001, 07:57 AM
Mr_Miyagi

presume it works when first established.. i.e both pcs can see each other?

why do you need to reboot?

have you tried coming out / back into network neighbourhood (after leaving it a few mins after reboot)? I have had instances where it took 5-10 mins before they could see each other

imho :p
May 13th, 2001, 12:53 AM
msn_tech

What protocol are you using. Install NetBEUI for Win98 and everything should work fine. I haven't had a workgroup problem since NetBEUI was added by Microsoft. I have TCP/IP file and print sharing disabled and let NetBEUI handle it. I have a file and print server that only has NetBEUI for the protocol. At work it's the only thing that has kept it simple to manage.
May 13th, 2001, 11:45 AM
imd14u

Are you using static IP's or are you PC's set to obtain from DHCP?
May 13th, 2001, 01:40 PM
klintman

I figured it out. I tried moving the card to the slot nearest the processor. It works now!

I have NetBEUI installed. It seems to work the best.

Thanks for the help and suggestions. :-)
May 15th, 2001, 05:16 PM
Bryanr

If your using broadband, remove netbui or you'll become an open target for hacks. Only use tcp/ip when connected to internet as the ports used can be blocked on your side by a router or firewall, netbui is non-routeable and can be used to find out your username. Fromm there the Cracker can hammer your system for the password, or just plain subvert your system.

Hope your using at least a firewall on both machines.