NEC nic problem

Printable View

August 3rd, 2005, 09:23 AM
schlever

NEC nic problem

I have an old NEC Versa 6050 that I'm trying to get onto my network. I have tried 2 working cards with no success. Win98 installs them fine, they are working in device manager. I have tried updated drivers, changing the IRQ, and even reinstalled Win98 with no success.

The cards are a FA410tx and a 3com 589c.

Any help would be greatly appreciated!
August 19th, 2005, 02:30 PM
3fingersalute

Quote:

Originally Posted by schlever

I have an old NEC Versa 6050 that I'm trying to get onto my network. I have tried 2 working cards with no success. Win98 installs them fine, they are working in device manager. I have tried updated drivers, changing the IRQ, and even reinstalled Win98 with no success.

The cards are a FA410tx and a 3com 589c.

Any help would be greatly appreciated!

Sorry this post was unanswered until this point, I was called away rather unexpectedly and just returned last evening.

What exact problems are you having with the network cards?

Are you using DHCP or a static IP ?

If DHCP, are you actually receiving an address?
If so, or if on static, can you ping a known good address on the LAN?
August 24th, 2005, 11:18 AM
schlever

Quote:

Originally Posted by 3fingersalute

Sorry this post was unanswered until this point, I was called away rather unexpectedly and just returned last evening.

What exact problems are you having with the network cards?

Are you using DHCP or a static IP ?

If DHCP, are you actually receiving an address?
If so, or if on static, can you ping a known good address on the LAN?

Sorry, I'm unable to pull a DHCP address at all. It doesn't matter if I'm plugged in directly to my lan or the modem. Funny thing is my pcicma modem works fine, so I don't think its a cardbus issue, but could be wrong.
August 24th, 2005, 03:42 PM
3fingersalute

What if you assign a static address, can you ping a known good address on the LAN ?
August 25th, 2005, 09:18 AM
schlever

Quote:

Originally Posted by 3fingersalute

What if you assign a static address, can you ping a known good address on the LAN ?

Unable to do that either, with either card.
August 25th, 2005, 09:34 PM
BOB IROC

Sounds like some of Windows 98 networking components are not installed. Is it Win98 or Win98 SE? I have seen this before. I would go to add/remove programs and Add windows componants and see if Client for Microsoft Networking is installed and any other networking componants that you may need. I haven't used 98 in such a long time I forget which ones you may need.
August 26th, 2005, 09:46 AM
schlever

Thanks Bob,

I'm using Win98SE, and have tried rebuilding the TCP/IP stack a few times.

I'm beginning to wonder if it is not a bios problem of some sort.

Quote:

Originally Posted by BOB IROC

Sounds like some of Windows 98 networking components are not installed. Is it Win98 or Win98 SE? I have seen this before. I would go to add/remove programs and Add windows componants and see if Client for Microsoft Networking is installed and any other networking componants that you may need. I haven't used 98 in such a long time I forget which ones you may need.
August 26th, 2005, 12:29 PM
3fingersalute

You could also try going into the network properties, and removing everything in there, and rebooting. It will refind the nic, then add in the appropriate networking components.

Make sure to have both the 98CD and nic drivers handy before doing this.
August 31st, 2005, 05:29 PM
schlever

Quote:

Originally Posted by 3fingersalute

You could also try going into the network properties, and removing everything in there, and rebooting. It will refind the nic, then add in the appropriate networking components.

Make sure to have both the 98CD and nic drivers handy before doing this.

Tried both, still no luck. I am at a loss!
September 8th, 2005, 05:50 AM
NooNoo

Is there a dialup adapter loaded?
September 8th, 2005, 02:13 PM
schlever

Quote:

Originally Posted by NooNoo

Is there a dialup adapter loaded?

Yes, I have a modem card and it works fine.
September 9th, 2005, 03:39 AM
NooNoo

Which slot have you tried the network cards in? Some are particular about where on the cardbus they are. Have you tried installing without the modem in?

Going back to network settings... what is acting as a dhcp server? Have you entered in the tcp/ip settings the gateway address?