HP P4T Alcatraz version for HP

Does anyone have the USB-HPD pinout for the chassis mount usb ports, it is 10 pin but not standard as it is HP Alcatraz version.
TIA

What's the revision of the MB? May be this link can help somehow:
http://www.elhvb.com/mboards/OEM/HP/
We used to sell those Kayaks, but I haven't seen them lately...

Thanks for the link Ruslan, the manual downloaded from the websight shows the location of the USB Pins on the board but not the pinout. The pinout is needed as the board is now a transplant in a non HP case.

When next time I'll have one of those HPs in service, I'll try to write down the pinout... ;)

Thanks Ruslan, it's the HP Alcatraz version of the Asus P4T Rambus board.

By the way, you can firure out pinout by testing each pin by multimeter...
I mean, it's easy to find +5v and "Ground" pins and these pins are the most important... "-data" and "+data" you can guess... Even swapping those Data signals will not destroy the connected device. In worst case scenario it will show "unrecognized device"...
;)

What model HP did it come out of?

Go here:
http://welcome.hp.com/country/us/en/support.html

At the top is a Search block. Enter your model number and then "motherboard jumpers" afterwards and hopefully, some good links will come up for you.