-
DP 422 Question
If you are familiar with the DP 422 from Dynatech Colorgraphics I could use your help. We have one that is giving an error:
Colorgraphics Brush Processor Downloader
[No Response from Brush Processor]
Loading Input and Output Board Setup
Frames buffer retrace interrupts not active, Not OK
Real-time machine control will not work. Press <space> to continue anyway...
Also have a new pc to hook up to this that is giving us the error:
Warning: Brush Processor Not Found. Video chassis is off, disconnected or malfunctioning.
Press <Esc> to ignore and continue, any other key to abort.
If you hit any other key it goes to the D: prompt.
If you hit <Esc> you get a lot of errors: in the following order:
Bit4 Error at: Read_ICR:1:Bit4 AT Bus Time Out
Bit4 Error at: Write_ICR:1:Bit4 AT Bus Time Out
DFB Not Found or Not Working, Reset VME Bus
Bit4 Error at: Read_ICR:1:Bit4 AT Bus Time Out
Bit4 Error at: Write_ICR:1:Bit4 AT Bus Time Out
Bit4 Error at: VME_Reset:1:Bit4 AT Bus Time Out
Start VME Reset
Done VME Reset
RDM Monitor Version 3.13
Bit4 Error at: Read_ICR:1:Bit4 AT Bus Time Out
Bit4 Error at: Write_ICR:1:Bit4 AT Bus Time Out
Downloading file: hip.out to : 860
Can’t Set 860 memory : ffff ! = 0
Can’t Set 860 memory : ffff ! = 690a
Waiting for i860 program startup...
Any help would be appreciated.
