Printable View
I reinstalled win98se and after this I am unable to use the cd-rom cos A msg is shown:
Open
Accessto D: is denied
Device is not ready
retry cancel
What is happening to, is the driver missing and how can i know the status
of it to be able to use it.
rgds
mloo55
Welcome to Windrivers mloo55
click start, run and type in sysedit and click ok
A window will open with 5 windows inside
Copy and paste the text in the window titled autoexec.bat and the window titled config.sys please.
Noo Noo
here it is what you asked me:
C:/Autoexec.bat
REM C:\ARCHIV~1\PERSYS~1\PERAV\PERVACD.EXE /BOOT
SET BLASTER=A220 I7 D1 H7 P330 T6
SET SBPCI=÷A÷¿0
mode con codepage prepare=((850) C:\WINDOWS\COMMAND\ega.cpi)
mode con codepage select=850
-----------------------------------------------
C:/config.sys
DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\WINDOWS\EMM386.EXE
FILES=50
device=C:\WINDOWS\COMMAND\display.sys con=(ega,,1)
Country=052,850,C:\WINDOWS\COMMAND\country.sys
Hope it may help
rgds
mloo55
Yes it did, we can rule out one reason for it not working altogether.
Look in device manager (start, settings, control panel, system). Is the cd rom listed near the top of the list? If so, does it have a ! next to it? If it does, go into the properties of the cdrom and post the make and model of the cd and the error code that is shown.
Is your computer branded (eg hp, compaq, time, emachine etc)? If so, what make and model is it?
If not go here and download and install everest it will tell you about your motherboard - post the make and model of the motherboard.
My friend
I did what you indicated and then i loaded a Cd and it worked normal. Thanks you very much
mloo55
err, but I didn't suggest anything, I was looking for more information from you... it appears it just decided to start working for you then!